Jump to content
SAU Community

Has Anyone Bought And Installed A Jjr Split Front/dump Pipe?

Kujotk

By Kujotk,
in New South Wales

 Share

Recommended Posts

Kujotk Grand Master

Kujotk

Posted
Posted

Just wondering if anyone has installed the just jap split combined front/dump pipe to thier R33?

I went to pick one up from Just Jap this arvo but they said its a very long job and if i get them to do it it will cost allot in labour. Are they full of shit? Are they just trying to rip me off or they don't really want to waste time doing this mod themselves?

secondly would anyone want to help out a brother SAU NSW member to help install it on a weekend with me soon????

Theres a box of beer if you want...

situated in hills area but can travel if you think the job can be done in one day.

someone please help me

Kujotk Grand Master

Kujotk

Posted
  • Author
Posted

thanks bob, are you available on the 6th or 7th of september???? there saturday and sunday before texi and i would like to try and get it done before texi if possible????? if not i'll have to wait...

also what brand you like?

Kujotk Grand Master

Kujotk

Posted
  • Author
Posted

but wouldn't the lack of light cause a problem????

but i think it might be safer to do it up here if possible incase we run into unexpected dificulties and so we don't have to haul along extra tools and an extra pipe around in my car....

but if its cool with some people i'll have it as an option incase things don't go to plan up here

FloydWestwood Veteran

FloydWestwood

Posted
Posted

its all good man i did mine in about 3 hours (and i know more about flushing my head down the toilet then skylines, thats my level of knowledge) just make sure you have all the gaskets and make sure you got the right tools and stuff, most of my time was spent walking to supercheap to buy a breaker bar for those rusted out nuts on the old dump pipe. easy job though.

Kujotk Grand Master

Kujotk

Posted
  • Author
Posted

nah slim, my car is standard height, only the front gtr bar makes it look lower. I have those ramps to lift the car up a foot aswell.

lol i have crap tools and all my dads sockets are broken lol.

with the gaskets i was told to buy the genuwine nissan gaskets, is that normal?

Should be all sweet though, abo bob is going to help me with it in a couple of weeeks

Sl!m Grand Master

Sl!m

Posted
Posted
nah slim, my car is standard height, only the front gtr bar makes it look lower. I have those ramps to lift the car up a foot aswell.

No worries, only asking cos I live with Abo Bob and our driveway isnt very friendly to low cars is all :O

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Marek
      Hi everyone.

      By Marek · Posted

      Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
    • Dose Pipe Sutututu
      Ethanol Content Sensor - Always at 11%?

      By Dose Pipe Sutututu · Posted

      and it ends up being already priced in as though you're just on 91RON without any ethanol. Car will lose a bit of economy as the short and long term fuel trims bring down the AFR back to stoich or whatever it is for cruise/idle for the engine.  
×
×
  • Create New...