Jump to content
SAU Community

Recommended Posts

I have been told that Apexi PFC doesn't work with auto Skyline.

But than again I read in another tread that this guy had it in his auto Skyline as well and was working fine.

How did you get the Apexi PFC to communicate with the auto ecu?

If it does work, does that also mean the HKS F-con should work to than?? VERY INTERESTING.

  • Replies 97
  • Created
  • Last Reply

Top Posters In This Topic

I purchased my PFC off of the NZ skyline forum (prior to this forum starting up i think)

I just plugged it in and it worked straight away. (I had it tuned a few months later)

I have heard others say that the PFC will not work on autos but mine has given no problem. Someone did suggest that this could be because it is a series I R33.

craz0, I spoke to the guy that installed the Wolf3D in the auto R33 GTS-t Skyline. He said it was very simple. He simply used the plug'n'play Wolf for the Skyline, then made sure that the TPS and tacho signal's were still routed to the auto ECU and it all works great.

Hope that helps.

If they can do that with the Wolf3D, why can't they do the same with the Apexi and the HKS.

Thanks too Gtst, at least now I know there is anothe ECU out there that can take the auto ecu as well.

Now sorry to whore your tread craz0, but with the extra power etc. Will you also need something to make the auto last? Like a bigger transmission cooler or strenghen the auto?

If the standard trans isnt strong enough I believe a Nissan Patrol box can be installed with very few mods. The benifit I believe is a thicker input shaft and splines. A good place for information about this is SA Race Transmissions and Differentials at Modbury North (SA).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...