Wolf3D with Auto R33 GTS-T

[skylineakt]

I have been told that Apexi PFC doesn't work with auto Skyline.

But than again I read in another tread that this guy had it in his auto Skyline as well and was working fine.

How did you get the Apexi PFC to communicate with the auto ecu?

If it does work, does that also mean the HKS F-con should work to than?? VERY INTERESTING.

[craz0]

I'm :confused:

[4door_Sleeper]

I purchased my PFC off of the NZ skyline forum (prior to this forum starting up i think)

I just plugged it in and it worked straight away. (I had it tuned a few months later)

I have heard others say that the PFC will not work on autos but mine has given no problem. Someone did suggest that this could be because it is a series I R33.

[craz0]

Well as far as Apex'i is concerned it doesn't work with any of the Auto's.

You think they would of tried it or would know something about it.:confused:

Bloody weird.

[GTS-t VSPEC]

craz0, I spoke to the guy that installed the Wolf3D in the auto R33 GTS-t Skyline. He said it was very simple. He simply used the plug'n'play Wolf for the Skyline, then made sure that the TPS and tacho signal's were still routed to the auto ECU and it all works great.

Hope that helps.

[craz0]

Thank's heaps GTS-t:)

[skylineakt]

If they can do that with the Wolf3D, why can't they do the same with the Apexi and the HKS.

Thanks too Gtst, at least now I know there is anothe ECU out there that can take the auto ecu as well.

Now sorry to whore your tread craz0, but with the extra power etc. Will you also need something to make the auto last? Like a bigger transmission cooler or strenghen the auto?

[Guest RedLineGTR]

talk to u on msn skylineakt

[GTS-t VSPEC]

I heard the auto's are quite strong, but over 400rwhp you'll have to do something I'd guess. I'm sure you can do similar things with the other ECU's.

[4door_Sleeper]

If the standard trans isnt strong enough I believe a Nissan Patrol box can be installed with very few mods. The benifit I believe is a thicker input shaft and splines. A good place for information about this is SA Race Transmissions and Differentials at Modbury North (SA).

[craz0]

Originally posted by skylineakt

Now sorry to whore your tread craz0.

That's alright the more info we find on modding autos the better for all of us.

Thank's all for the info:)

[Guest RedLineGTR]

interesting..

[4door_Sleeper]

bump

[sil21jun]

how many mapping points?

[sil21jun]

minimum I suggest would be 16 x 16.

[skylineakt]

I think the E-manage has 16X16, that is with the supporting software and harness.

[sil21jun]

how much you guys are paying for a complete emanage ecu with ignition timing loom, fuel loom and software?

[skylineakt]

I got a quote for about $1200 fitted, tune on dyno, everything.

[hippy]

safc 2 can be tuned to every 300rpm i think as opposed to the safc1 which is 500. i got an auto to so its an interesting thread ... stock auto gives up about 180-200rwkw ... not much i think ... does anyone know how much a trans cooler cost?

[Guest RedLineGTR]

yep sounds about right..not too sure.