R32 GTSTT Posted August 24, 2003 Share Posted August 24, 2003 hey guys, ive just exchanged a cd player for a Rx-7 oil cooler. However i dont have much of an idea on how to connect it up. It is going into my 1992 R32 GTSt, if anyone has connected one up there help will be appreciated. Link to comment https://www.sau.com.au/forums/topic/23334-oil-coolers/ Share on other sites More sharing options...
Steve Posted August 24, 2003 Share Posted August 24, 2003 You should have an adapter that goes onto the stock oil filter mount. Two lines come off it. If you have a remote oil filter, one line goes to it ( the short one), the longest goes to the cooler, and an inbetween goes from filter to the cooler. If you dont have the remote oil filter, just adapter plate and two lines to the cooler. Link to comment https://www.sau.com.au/forums/topic/23334-oil-coolers/#findComment-499246 Share on other sites More sharing options...
MattyB Posted August 24, 2003 Share Posted August 24, 2003 on my trust kit i just bought. you have four lines. two from the adapter to the remote oil filter, two from the remote oil filter to the oil cooler. this is because the remote oil filter housing has thermostats inside. if your doesnt have thermostats inside. (not sure how to check) then earls make a oil thermostat. pm if you want the part number. Link to comment https://www.sau.com.au/forums/topic/23334-oil-coolers/#findComment-499456 Share on other sites More sharing options...
GTS20X Posted August 25, 2003 Share Posted August 25, 2003 Be carefull as some of the RX-7 oil coolers have thermostat inside which blocks/reduces oil flow when cold as on the rotarys the oil to the cooler is by-pass oil not full flow like you will be fitting it. Link to comment https://www.sau.com.au/forums/topic/23334-oil-coolers/#findComment-500273 Share on other sites More sharing options...
Craved Posted April 4, 2004 Share Posted April 4, 2004 Bringing up an old thread here, but when fitting a large oil cooler, do you need to increase the oil pressure to make it through this long extension of oil flow? will be at least an extra litre of oil going through the system too! post some pics of the cooler for you guys, got a real bargain on it too! Link to comment https://www.sau.com.au/forums/topic/23334-oil-coolers/#findComment-760815 Share on other sites More sharing options...
tastyratz Posted April 4, 2004 Share Posted April 4, 2004 i had no idea that the rotaries had a thermostat on the oil coolers that did that! is there any way to hook up an rx-7 cooler with the thermostat as being functional? im over in the states and climates vary alot so this wouldnt be bad. EDIT: sidenote; whats the thread pattern and-length on an rb25det oil filter? i want to put the remote filter w/ oil cooler on but i need to know the pitch etc. to find a compatible one over here. Link to comment https://www.sau.com.au/forums/topic/23334-oil-coolers/#findComment-760816 Share on other sites More sharing options...
Craved Posted April 4, 2004 Share Posted April 4, 2004 as an addition to what tastyratz has just posted.... is there a optimum oil temp needed for engines, specifically on rb25det's! Link to comment https://www.sau.com.au/forums/topic/23334-oil-coolers/#findComment-760819 Share on other sites More sharing options...
93RPS13 Posted April 4, 2004 Share Posted April 4, 2004 where could i buy this adapter plate?? thanks Link to comment https://www.sau.com.au/forums/topic/23334-oil-coolers/#findComment-760828 Share on other sites More sharing options...
Steve Posted April 5, 2004 Share Posted April 5, 2004 Check out the earls website here in aust for adaptors. They also sell inline thermostats. Link to comment https://www.sau.com.au/forums/topic/23334-oil-coolers/#findComment-761723 Share on other sites More sharing options...
Craved Posted April 6, 2004 Share Posted April 6, 2004 cheers for the info steve, do they have a shop front in silverwater? also a couple more questions. Do those of of you that run oil collers disconnect them and drain the oil out with oil changes? Also has anyone noticed oil pressure drop after installing them? Does anyone recommend having a thermostat in the setup? thanks in advance! Link to comment https://www.sau.com.au/forums/topic/23334-oil-coolers/#findComment-765407 Share on other sites More sharing options...
Bl4cK32 Posted April 6, 2004 Share Posted April 6, 2004 1. Why do halhf a job 2.U would if u dont fill em up to compensate. (anyone know how to do this, its got me stumped) 3.yes Link to comment https://www.sau.com.au/forums/topic/23334-oil-coolers/#findComment-765420 Share on other sites More sharing options...
Craved Posted April 6, 2004 Share Posted April 6, 2004 1. Why do halhf a job2.U would if u dont fill em up to compensate. (anyone know how to do this, its got me stumped) 3.yes yeah with the second question - oil pressure - i was assuming that it would be full including the oil cooler and lines! still looking for info on how these thermostats work so this will obviously affect how the cooler is set up! Link to comment https://www.sau.com.au/forums/topic/23334-oil-coolers/#findComment-765510 Share on other sites More sharing options...
autObarn Posted April 7, 2004 Share Posted April 7, 2004 yeah with the second question - oil pressure - i was assuming that it would be full including the oil cooler and lines!still looking for info on how these thermostats work so this will obviously affect how the cooler is set up! it is importand to have a thermostat in the setup as the cooler and lines usually takes an extra litre or so, this added capacity combined with freezing air over cooler can mean especially in winter that the oil either never comes up to temp or runs to cold for too long. the t/stat is cheap and in just run inline if you use the earls or motospecs item part no. (0555-331758) it is depending on supplier $113. be aware to never mount cooler with inlets/outlets facing down, and to use a filter with anti drain back valves in them if you intend to remote mount it. most filters do have this valve but some cheaper brands dont. Link to comment https://www.sau.com.au/forums/topic/23334-oil-coolers/#findComment-765767 Share on other sites More sharing options...
Bl4cK32 Posted April 7, 2004 Share Posted April 7, 2004 thermostat is in sandwich block between oil filter and block. If engine oil temp is cold, oil bypasses lines and just circulates the filter, going back into the engine. Same way thermostat works for cooling system. Now the big question is, how do u fill oil cooler system if a) oil is cold (thermostat is shut obviously), B) how do you know how much to put in? Link to comment https://www.sau.com.au/forums/topic/23334-oil-coolers/#findComment-765890 Share on other sites More sharing options...
Steve Posted April 7, 2004 Share Posted April 7, 2004 in line thermostat is an open valve that links 4 connections (two on each side with a thermostat that blocks off the middle when hot) - and is open when cold. this allows the system to remain pressurised at all times, so no chance of oil surge. Its a bit hard to describe without pictures and I dont have any. As the oil gets hot the thermostat shuts which forces the oil to travel via the cooler. Link to comment https://www.sau.com.au/forums/topic/23334-oil-coolers/#findComment-765989 Share on other sites More sharing options...
Sydneykid Posted April 7, 2004 Share Posted April 7, 2004 Hi guys, I have never used a thermostat on an oil cooler on any car anywhere in Australia. Link to comment https://www.sau.com.au/forums/topic/23334-oil-coolers/#findComment-766119 Share on other sites More sharing options...
Chris32 Posted April 7, 2004 Share Posted April 7, 2004 Hi guys, I have never used a thermostat on an oil cooler on any car anywhere in Australia. Mine hasn't got a thermostat either, the oil gets up to temp quick enough Mine is mounted behing my intercooler, between my radiator, and it seems to do a good job Quick question, what is optimum temp for synthetic oil? Link to comment https://www.sau.com.au/forums/topic/23334-oil-coolers/#findComment-766193 Share on other sites More sharing options...
Bl4cK32 Posted April 7, 2004 Share Posted April 7, 2004 Hi guys, I have never used a thermostat on an oil cooler on any car anywhere in Australia. Hey, it snows in Japan and they got em Link to comment https://www.sau.com.au/forums/topic/23334-oil-coolers/#findComment-768122 Share on other sites More sharing options...
Sydneykid Posted April 7, 2004 Share Posted April 7, 2004 Hey, it snows in Japan and they got em I live in Australia Link to comment https://www.sau.com.au/forums/topic/23334-oil-coolers/#findComment-768136 Share on other sites More sharing options...
Bl4cK32 Posted April 7, 2004 Share Posted April 7, 2004 I live in Australia Thats ok, i pretend im in Japan Link to comment https://www.sau.com.au/forums/topic/23334-oil-coolers/#findComment-768235 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now