Jump to content
SAU Community

Recommended Posts

I rang the Licence Dept. they told me that neons are legal as long as you can not see the neon tube but a cop picked me up and told me they are ilegal and either the licence dept or me was talking shit but i have the conversation recorded what do you guys say have you being hasseld by cops about them?

Link to comment
https://www.sau.com.au/forums/topic/23358-are-underbody-neons-legal-or-not/
Share on other sites

I believe they are legal provided that as you said you cannot see the tube itself and you cannot have a red nean on the front or a white neon on the back as people may confuse headlights with brake lights.... apart from that you should be fine...

Sounds like the cop just wanted to give you a hard time...

rollaboyz website has a write-up on thier car legality session deeming what is legal and what is not.

Neons ARE legal

Colour is irrelevant.

on the Proviso you cant see the tube! (looks shit if you can anyway)

see thier site for more details.

p.s. all cops are tosser's. if your gonna have neons, dont use them on the road!

ok but my point is why sell the equipment if u cant use it you know its a conspiracy i swear get us to buy it goverment makes money fines us for having it government makes money gets us to remove it go to pits government makes money and after all that money the cops still have a nerve to ask for a pay rise and asking for the publics support in all good words blow me thats BS there are kids killing each other and taking drugs yet they make neons and blow offs such a big fkn problem

Sr20ist - it's all modifications, and the retailers sell them as a show/race accessory (that is, all items eg bov's). It isn't a conspiracy dude :D

But saying that, a mate got pulled up by police, and they couldn't find ANYTHING on his car to defect him with, but they had it in their minds to give him a yellow ... so what did he get it for?? His little smelling tree that hangs off the rear view mirror!!

They all have their own ideas of the law, but it's a verified fact (which the pits agree with) that your neons are allowed to be on, and on the road, as long as noone can see the tubes ... you may be able to pick up permits for them perhaps..?

After a session with Reno at the Department of Transport he informed us that neons were legal, even driving with them. The only condition was that the tube was not visible from standing around the car.

So as long as the neon tube is hidden well you shouldn't have a problem.

Of course cops on the road will argue the point but if yo udo get stickered go see Reno down at Welshpool and he will clear your car.

I dont think that you're gonna get a permit for your neons.

Just like you wont get a permit for your subwoofah or your pedals/paint/gearknob because they do not affect the impact crashworthiness or mechanical function/capacity of the car.

Like Dan said, if you cop a sticker for your neons, go to welshpool and plead your case to Reno.

Provided that everything else on the vehicle is legal, they will tear up the work permit for you. However, if you do not have the good fortune of everthing on your car being 100% legal, then you can hardly complain that the policemen was misinformed, and that it wasnt your neons, but your welded diff that he should have stickered you for.

So my advice is, if you want people to look at your car, then expect attention in all its wonderful forms.

and if you've got a bomb held together with gaffa and zip ties, dont make it glow like a freakin xmas tree.

Sr20ist

the neons are completely legal while you are driving as long as the tubes are not visible. Regardless of what everyone else says they are completely legal.

Pits will let you go if they dont then you can contest it because new laws state that they are.. Been threw it all her in W.A

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...