Jump to content
SAU Community

Recommended Posts

yeah so when roughly would it come on do you reckon

My guess(Key word) would be boost by the end of high first gear, quick change full boost by about 4000 to 4500rpm maybe even 5000rpm just depends on the motor.

My 42R comes on about there but has head work and larger exhaust valves. The guy who bought my 25/30 put another 35/40 with a 1.06(1.04??) rear and Ive been told its laggier. I used to get full boost before 4000rpm in second with the .82 rear so you should be in a similar ball park.

If a guess was all you were after, I hope it helps.

Cheers

Bill

My guess(Key word) would be boost by the end of high first gear, quick change full boost by about 4000 to 4500rpm maybe even 5000rpm just depends on the motor.

My 42R comes on about there but has head work and larger exhaust valves. The guy who bought my 25/30 put another 35/40 with a 1.06(1.04??) rear and Ive been told its laggier. I used to get full boost before 4000rpm in second with the .82 rear so you should be in a similar ball park.

If a guess was all you were after, I hope it helps.

Cheers

Bill

Two totally different turbos.

yeah so when roughly would it come on do you reckon

Would help if you could actually identify the turbo. There are about 10 different T04 combinations so just asking when you will make boost is like saying how much hp will I make with 20psi and not stating what turbocharger you actually have.

Two totally different turbos.

I am aware of that (The difference btw turbos) but with the larger rear housing on a stock motor(im assuming no head work, larger throttle etc) the reaction time for full boost would be similar (Hope that is clear as mud).

Btw 4 & 5g in second is where I would guess full boost will occur for this turbo on his motor. Its like guessing jelly beans in a jar but I dont mind guessing and then he can tell us when it does and someone will win (yay).

Mate put it on and open a new thread with the result.

Hey all

Can someone please tell me when a 66mm front wheeled t04 with a 1.00 rear would come on boost on a 30/25.

I know its a stupid question but i just roughly want to know. does anyone have any idea..

If you look through the RB30 turbo results you'll find one of the early results have a T66 with a .84a/r turbine housing running a 25 head - should give you an idea (full boost at 4500rpm for that setup I think). It will be laggier than that :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...