Jump to content
SAU Community

Recommended Posts

Hi,

Got a few exhaust parts up for grabs due to upgrade of system!

> I need to get rid of my HKS Super Dragger Exhaust, its a mild steel catback which is 3.2" off the back of the cat, and ends up at 3.7" just before the stainless rear muffler.

It has a resonator mid way, and the large muffler at the back, but the rear muffler is EMPTY :laugh: my flames attacked the packing inside, and after a trackday I had white stuff and steel wool hanging out the back of it, so i gutted it.

Its not stupidly loud as you would think, its nice and deep on idle, not droney on cruise, and sounds farking good on full noise.

It has a bit of a scrape on the underside where it passes under the diff, otherwise its in great nick, suits any R32, nice and shiny and looks tough. A true Jap spec zorst.

$300

> Also a Greddy Trust catback exhaust system. In ok nick, full mild steel with stainless rear muffler, a very quiet exhaust. 3" all the way through, suits all R32.

$250

> Some stainless steel front pipes to suit GTR, off a 32, not sure what else they might fit, immac condish, has flex joint on front section. Two 2.5" into a single 3".

$200

> Stainless steel 3" high flow cat. Immac condish, retains insides.

$120

> Stainless steel 3" SUPER ULTRA HIGH FLOW cat. Immac condish, has air for insides. Should fit all Skylines. Definately 32 GTR.

$80

Bits located in Melb, post or frieght can be done no worries as these zorsts are separable in the middle.

Pics up soon.

Cheers!

Mat.

0400 558 030

Link to comment
https://www.sau.com.au/forums/topic/233877-hks-super-dragger-gtr-front-pipes/
Share on other sites

Hey mate,

Interested in these. Will they both simply bolt together and onto a standard 32GTR exhaust from the below cat, backwards?

What brand are the front pipes?

Also any idea on postage to Sydney?

> Some stainless steel front pipes to suit GTR, off a 32, not sure what else they might fit, immac condish, has flex joint on front section. Two 2.5" into a single 3".

$200

> Stainless steel 3" high flow cat. Immac condish, retains insides.

$120

If you have stock front and cat, these catbacks WILL fit 100%

The catbacks listed here will bolt directly onto most front/cat setups, but due to different front and cat combinations theres no such thing as a guaranteed fit, but it will be close. You may have to heat and bend one of the pipes marginally. Nothing major.

I can guarantee that the fronts listed here, the ultra high flow cat, and HKS catback WILL bolt onto any 32 GTR 100% with no worries.

As for the greddy I would expect it to do the same but cant guarantee it.

I havent ever used the high flow cat, but I dont see why it wouldnt bolt up.

The brand of the fronts is unknown, but judging by the quality they could be a jap item. Definately not cheap ebay shit. Ive never had a problem with them; im only selling because im going to a full twin setup.

Any other Q's just ask!

Cheers!

After closer inspection I found that some of the guts of the cat is missing (pictured left) so it is therefore good to evolve to be a ULTRA HIGH FLOW cat and is now also $80.

The rear half of the Super Dragger is VERY LIGHT, being gutted and all..

..and ill also point out that all of the listed items have great ground clearance, legal even on my car which is fairly dumped.

Pics as requested: (dont do any justice, dark and crap camera)

post-17897-1220430248_thumb.jpg

post-17897-1220430530_thumb.jpg

post-17897-1220432856_thumb.jpg

post-17897-1220433589_thumb.jpg

  • 1 month later...
  • 3 weeks later...
  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I know people cry at the price of the Getrag 12-14k for a conversion now, but it really is a nice mid point. Not going to get change from 10k on a gearset installed.  $30k++ for sequential.   I know you run the risk of a damaged used one and parts are hard to get but as a street car gearbox its really hard to beat. If you enjoy a more traditional manual, its the choice no question.     
    • Time to decide what’s more import, your power level or your budget because you’re going to struggle to keep both 
    • Our Southern Highlands Cruise is proudly registered with “R U OK?” Day.  Sometimes the best way to check in on your mates is by getting out for a drive together. Sharing a common passion like cars creates the perfect space to chat, connect, and support each other.  A simple “R U OK?” can make all the difference. Let's enjoy the drive, the company, and look out for one another. PLEASE WEAR YELLOW FOR “R U OK?” DAY Sunday 14th September 2025 9:30AM Meeting Crossroads Homemaker Centre 10:00AM Cruise Departure Via Old Hume Hwy 11:45AM Arrival at Mittagong RSL Club Meet Location: Crossroads Homemaker Centre Final Destination: Mittagong RSL Club *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yep, its been down for a while, as I understand it it will be back soon.
    • Yeah I also looked at Plazmaman, but, it ended up alot  cheaper getting black ones through EFI when you also added in the delivery cost
×
×
  • Create New...