Jump to content
SAU Community

Recommended Posts

Hey all, just got my Ceffy back after a 5 month downtime (thanks regency) and im having this problem...

Im not sure why its doing it, it never did it before. What basically happens, is if I turn to fast around a corner, and accelerate on the way out, the whole car begins to shake as it comes on boost... It also sometimes does it, if the wheels are spinning and the back end wants to come around.

It feels like the back wheels are bouncing on the road, but im pretty sure something might be wrong with the engine? Just had new spark plugs put in...

Ill that I changed suspension wise, was the stock A31 fronts... and the rears from an R32. Is there something that the 32 springs dont like about the car? Is it more of a temporary thing or can they actually stay in there with no problems?

Got some 205/60/15 on the rears, and 195/60/15 on the front. Might that have anything to do with it? They came off a mate of mines R31 Coupe...

Tailshaft had to replaced, so got my hands on a 32 one... and mixed them together. Could that be whats causing it?

Im absolutely clueless... thanks for your time. :(

Adam.

Edited by AdMan
Link to comment
https://www.sau.com.au/forums/topic/234132-car-shakes/
Share on other sites

Also check if your tail shaft is up the right way, Sounds stupid i know unbolt it and rotate it 180 deg and see if that makes a difference. did with mine and a mates car when we didn't mark and put the tail shaft in the right way felt like you where on one of those massage beds on full noise.

Link to comment
https://www.sau.com.au/forums/topic/234132-car-shakes/#findComment-4103628
Share on other sites

Also check if your tail shaft is up the right way, Sounds stupid i know unbolt it and rotate it 180 deg and see if that makes a difference. did with mine and a mates car when we didn't mark and put the tail shaft in the right way felt like you where on one of those massage beds on full noise.

Hmm.. might have to go down to the garage and see what they did...

My dad was behind me in his car today, and told me as I went around corners my rear wheels were coming about 100mm off the ground! :)

Link to comment
https://www.sau.com.au/forums/topic/234132-car-shakes/#findComment-4104958
Share on other sites

Probably your rear shocks then, did you say you are using R32 springs on your cefiro shocks, or R32 shocks/springs.

Either way what you have is not setup correctly.

r32 shocks and springs...

I borrowed them.. The standard cefiro ones I got from ebay, the shocks were stuffed. So it wouldnt of passed Regency. And I cant put my coilovers back in, because then I have to put the fronts back in, tokico and they are so extremely low. Need new front coilovers. :banana:

Link to comment
https://www.sau.com.au/forums/topic/234132-car-shakes/#findComment-4113210
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...