Jump to content
SAU Community

Recommended Posts

Hey guys i have spend a lot of time searching for answers to my problem but just cant seem to find anything that works. The car used to missfire randomly a while ago then got worse and kept fouling spark plugs. So i changed to the 'wasted spark' setup. Car still missfired but it was now worse. I cleaned the AAC valve, Checked all my wiring, tried to do a diagnostic to see whats wrong but i dont have any light on my 33 ecu and the dash isnt flashing either. Some times though the missfire goes away for a bit randomly. Then it comes back again. Getting really annoying now. The other night i unplugged the O2 sensor and the car was fine for a while. The started missing again so plugged the sensor back in and it went fine again. Then started missing and now it misses whether its in or not. Today i cleaned the AFM and the car went fine for 15 mins then i tried to turn the boost from stock to 10psi and it started missfiring badly again and couldnt rev out. So i put the boost down to stock and its still running like crap. The missfire is worse under load, when i have my foot down more and when boost is higher. I also have a power fc and it does the same thing with that plugged in.

Im all out of ideas guys so i would love anyones help on this as im just so sick of it...

Thanks heaps in advance

Link to comment
https://www.sau.com.au/forums/topic/234222-r33-missfire-please-help/
Share on other sites

  • Replies 50
  • Created
  • Last Reply

Top Posters In This Topic

Had the same issue, tried everything you have said and nothing worked untill I forked out for SPITFIRE coil packs,

Havent had 1 problem ever since. I think your HALTECH's could also be the problem

( Good idea to put irridium plugs in it to, stock ones from nissan arnt that expensive )

mate i had the same problem too... got my splitfire coilpacks in on the weekend and it works like a charm now... i used to get misfire in pretty much every gear above 5000RPM. Now its fine, smooth all the way to redline...

spend the $500 on the coilpacks... seams a lot but well worth it after the results i saw on my car.

$500 ey, I may have to do that myself.

After getting my car serviced I got heaps of misfire at boost, I took it back to them and they charged me $270 for 1 rail of 3 genuine secondhand ones :( I'd only just got the car so they saw me coming,

Now after putting my FMIC in I get alot of misfire when I shift down to 2nd and floor it, so new coils are next on the list

mate i had the same problem too... got my splitfire coilpacks in on the weekend and it works like a charm now... i used to get misfire in pretty much every gear above 5000RPM. Now its fine, smooth all the way to redline...

spend the $500 on the coilpacks... seams a lot but well worth it after the results i saw on my car.

my misfire was pretty consistant, 2nd gear was the worst.

if i had less than half a tank it would be a little worse but if i had my foot down it wud misfire everytime

so i did some homework as around n found splitfire ones were the best

there are cheaper alternatives but didnt wanna risk spending $300 and not fixing the problem.

i got mine for $492 from nengun, took like 3 weeks so if u want them a little quicker, one of the traders on here is selling for $520 or sumthin..

Yeah just wanna make sure its gonna deffinately fix the problem. I used to have faulty stock coilpacks and they felt different to this when driving. This problem just doesnt feel the same as last time. Maybe ill try find someone with coilpacks i know are working and borrow them to see if it fixes my problem then go buy some splitfires if it does.

one question lol im still only learnning and i supose ive never come across missfire in my car yet but what is misfire???? the name sugests its sort of missing a beat and probably looses power, but how do you know you have missfire?

Trust me... you will know. Will feel like the cars running out of petrol. Just skips beats like you said. You get no power from that cylinder when it skips so it will be real jerky and make some weird popping sounds lol. Best way i can describe it..

i had a misfire in my 33 and i was postive the coil packs were stuffed, it turned out that all it was was the spark plugs, they had to be regapped to 0.7, no more misfire for me. :P

maybe check that first, its an easy and cheap fix if thats the problem.

Edited by GreyGTST

Lol i have gapped the all the way from 1.1 to .8 to .6 Nothing works... Only happens when it comes onto boost fairly hard. If i slowely accelerate with no boost then that gear WILL actually rev out. Just hates the boost. Any more ideas guys?

GreyGTST I guarantee one or more of your coilpacks are stuffed.

As I learnt gapping the plugs is just a band-aid solution. It creates a smaller gap for the "weak" spark created by faulty coilpacks to jump across but really doesnt get rid of the problem.

It will run fine with stock boost but when you go to add more boost (even adding intercooler etc that makes the car breathe easier could create this) the missfire will reappear. You shouldnt have to run such a low gap on your plugs.

If the car doesnt run with 1.1 (stock nissan plugs) with stock or even slightly increased boost something is wrong. And coilpacks would be the first place to start :P

Spend the $500 on some Spitfires and enjoy the benefits of the car running properly. I defintly learnt this over the last week.

As for Bennett I would guess that it is your coilpacks by the sound of the symptons....I know you have haltechs ones but try to find someone with a set of Spitfires and borrow them for a few hours to see if it solves the issue then buy some. The boost sounds like its literally blowing your candles out (spark plugs) lol. And yes sometimes being fine and other times not being fine is normal for faulty coil packs. Sometimes they ignite other times they dont.....

Mate I'm in the same boat as you, i've got new irridium spark plugs (I didnt gap them as i didnt know how to and didnt want to stuff perfectly new plugs, btw did u gap urs ur self?) and still the same problem. When i hit 5000rpm it just missfires like a mother...

Could this problem be fuel related or injectors?

Edited by da spike

Arbess - I have read that thread alreay lol. You had some bad luck too. Funny thing happened today though, some of my wiring came loose and i found it later melted from touching the exhaust lol. Luckily it didnt go through to the copper itself like you had or i would have to fix that too.

Da spike - You gap spark plugs with a feeler guage. Little thin bits of measured metal that you slide into the spark gap and make sure its the right gap size. And yeah when you have this tool its easy to do yourself. I found my problem wasnt actually at 5000rpm but more something to do with boost or being under load. I can have my foot on the throttle a tiny bit and still rev to 6500rmp but i can also be at 2000rpm with foot flat and it missfires, infact its not even missfiring anymore, just hesitates really bad and backfires and goes absolutely no where. Although the car is fine for normal driving. So strange... The missfire could be fuel related (you may to rich/lean) but generally missfire problems in rb's are electrical. Hope that helps...

I found my problem wasnt actually at 5000rpm but more something to do with boost or being under load. I can have my foot on the throttle a tiny bit and still rev to 6500rmp but i can also be at 2000rpm with foot flat and it missfires, infact its not even missfiring anymore, just hesitates really bad and backfires and goes absolutely no where. Although the car is fine for normal driving. So strange... The missfire could be fuel related (you may to rich/lean) but generally missfire problems in rb's are electrical. Hope that helps...

that is exactly what was happening to mine.

i hope you end up finding it. all it takes is for a small short circuit.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...