Jump to content
SAU Community

Recommended Posts

Seem to recall a mate who got his r34 gtt turbo highflowed from gcg turbos for 1700bux but they are in sydney so you could perhaps ship it down?, dont know if the prices have come down.

Any thought on buying a garrett item or hks? tad more expensive but you can always sell your old one to make up the difference.

Link to comment
https://www.sau.com.au/forums/topic/234357-gcg-highflow/#findComment-4108366
Share on other sites

Depends how much you want to spend really... And if you want a ball bearing or journal bearing turbo. If you supply the turbo the highflowing/rebuilding cost is usually around 1000-1500 if you want to keep it journal bearing. Depending how cheap you find a second hand highflow or even a blown highflow would determine which path to travel. Rebuilding journal bearing turbo's is relatively cheap compared to a ball bearing.. as in 500-600 for a rebuild compared to 1000ish for a ball bearing rebuild.

If you get yours highflowed however you can be guaranteed that your banjo's and oil/water lines will line up... you also build a relationship with your workshop and get a warranty.

I don't know brisbane so can't help you out any further:)

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/234357-gcg-highflow/#findComment-4108373
Share on other sites

Depends how much you want to spend really... And if you want a ball bearing or journal bearing turbo. If you supply the turbo the highflowing/rebuilding cost is usually around 1000-1500 if you want to keep it journal bearing. Depending how cheap you find a second hand highflow or even a blown highflow would determine which path to travel. Rebuilding journal bearing turbo's is relatively cheap compared to a ball bearing.. as in 500-600 for a rebuild compared to 1000ish for a ball bearing rebuild.

If you get yours highflowed however you can be guaranteed that your banjo's and oil/water lines will line up... you also build a relationship with your workshop and get a warranty.

I don't know brisbane so can't help you out any further:)

Cheers.

His turbo is already ball bearing.

Yes you can send yours to GCG in Sydney to high flow. I have one. Yes it's cheaper if you can find a blown turbo to send them then sell yours in good condition. I just blew mine so the choice was obvious.

Link to comment
https://www.sau.com.au/forums/topic/234357-gcg-highflow/#findComment-4108624
Share on other sites

How does a GCG BB highflow compare to a similar sized HKS or Garret item?

Is the difference huge in performance and response?

Does Garret even make a direct bolt on incl. standard dump pattern for RB25?

Last time i looked, GCG was charging $1950 exchange.

Link to comment
https://www.sau.com.au/forums/topic/234357-gcg-highflow/#findComment-4108645
Share on other sites

i thought of going through the gcg high flow route but iv decided to go for HKS GTRS which is muich more reliable than the gcg high flow and is also a direct bolt on kit for R33

from nengun its 2600 delivered minus the cost of selling your good conditioned turbo

gcg charge 2000 to high flow your standard turbo. so for the extra 300 odd definetely go HKS

Link to comment
https://www.sau.com.au/forums/topic/234357-gcg-highflow/#findComment-4109503
Share on other sites

Mmm decisions decisions.

What sort of boost can a highflow handle?

GTRS's can easily do 20 psi i hear. Since they are fairly small they would spool to 20 psi pretty quick too!

Now I'm leaning towards the GTRS again...

Link to comment
https://www.sau.com.au/forums/topic/234357-gcg-highflow/#findComment-4109549
Share on other sites

Mmm decisions decisions.

What sort of boost can a highflow handle?

GTRS's can easily do 20 psi i hear. Since they are fairly small they would spool to 20 psi pretty quick too!

Now I'm leaning towards the GTRS again...

Go onto youtube and type in hks gt-rs; there is a bloke who posted like 9 videos of his gtst with the gt-rs and it is amazingly responsive, frys the tyres very easily.

it will change your mind on the highflow.

Link to comment
https://www.sau.com.au/forums/topic/234357-gcg-highflow/#findComment-4109737
Share on other sites

Why rebuild or repair a turbo when its nearly the price of buying one new?. The HKS GTRS will love 2 bar.

:P ummmm for about 3 seconds before it pushes that much hot air it'll melt all 6 pistons.....way out of the GT-RS's efficiency rating.

Link to comment
https://www.sau.com.au/forums/topic/234357-gcg-highflow/#findComment-4109750
Share on other sites

Go onto youtube and type in hks gt-rs; there is a bloke who posted like 9 videos of his gtst with the gt-rs and it is amazingly responsive, frys the tyres very easily.

it will change your mind on the highflow.

+ 1

the turbo looks brutal. perfect upgrade for GTS-T

Edited by DrewII
Link to comment
https://www.sau.com.au/forums/topic/234357-gcg-highflow/#findComment-4109937
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...