Jump to content
SAU Community

Recommended Posts

Seem to recall a mate who got his r34 gtt turbo highflowed from gcg turbos for 1700bux but they are in sydney so you could perhaps ship it down?, dont know if the prices have come down.

Any thought on buying a garrett item or hks? tad more expensive but you can always sell your old one to make up the difference.

Link to comment
https://www.sau.com.au/forums/topic/234357-gcg-highflow/#findComment-4108366
Share on other sites

Depends how much you want to spend really... And if you want a ball bearing or journal bearing turbo. If you supply the turbo the highflowing/rebuilding cost is usually around 1000-1500 if you want to keep it journal bearing. Depending how cheap you find a second hand highflow or even a blown highflow would determine which path to travel. Rebuilding journal bearing turbo's is relatively cheap compared to a ball bearing.. as in 500-600 for a rebuild compared to 1000ish for a ball bearing rebuild.

If you get yours highflowed however you can be guaranteed that your banjo's and oil/water lines will line up... you also build a relationship with your workshop and get a warranty.

I don't know brisbane so can't help you out any further:)

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/234357-gcg-highflow/#findComment-4108373
Share on other sites

Depends how much you want to spend really... And if you want a ball bearing or journal bearing turbo. If you supply the turbo the highflowing/rebuilding cost is usually around 1000-1500 if you want to keep it journal bearing. Depending how cheap you find a second hand highflow or even a blown highflow would determine which path to travel. Rebuilding journal bearing turbo's is relatively cheap compared to a ball bearing.. as in 500-600 for a rebuild compared to 1000ish for a ball bearing rebuild.

If you get yours highflowed however you can be guaranteed that your banjo's and oil/water lines will line up... you also build a relationship with your workshop and get a warranty.

I don't know brisbane so can't help you out any further:)

Cheers.

His turbo is already ball bearing.

Yes you can send yours to GCG in Sydney to high flow. I have one. Yes it's cheaper if you can find a blown turbo to send them then sell yours in good condition. I just blew mine so the choice was obvious.

Link to comment
https://www.sau.com.au/forums/topic/234357-gcg-highflow/#findComment-4108624
Share on other sites

How does a GCG BB highflow compare to a similar sized HKS or Garret item?

Is the difference huge in performance and response?

Does Garret even make a direct bolt on incl. standard dump pattern for RB25?

Last time i looked, GCG was charging $1950 exchange.

Link to comment
https://www.sau.com.au/forums/topic/234357-gcg-highflow/#findComment-4108645
Share on other sites

i thought of going through the gcg high flow route but iv decided to go for HKS GTRS which is muich more reliable than the gcg high flow and is also a direct bolt on kit for R33

from nengun its 2600 delivered minus the cost of selling your good conditioned turbo

gcg charge 2000 to high flow your standard turbo. so for the extra 300 odd definetely go HKS

Link to comment
https://www.sau.com.au/forums/topic/234357-gcg-highflow/#findComment-4109503
Share on other sites

Mmm decisions decisions.

What sort of boost can a highflow handle?

GTRS's can easily do 20 psi i hear. Since they are fairly small they would spool to 20 psi pretty quick too!

Now I'm leaning towards the GTRS again...

Link to comment
https://www.sau.com.au/forums/topic/234357-gcg-highflow/#findComment-4109549
Share on other sites

Mmm decisions decisions.

What sort of boost can a highflow handle?

GTRS's can easily do 20 psi i hear. Since they are fairly small they would spool to 20 psi pretty quick too!

Now I'm leaning towards the GTRS again...

Go onto youtube and type in hks gt-rs; there is a bloke who posted like 9 videos of his gtst with the gt-rs and it is amazingly responsive, frys the tyres very easily.

it will change your mind on the highflow.

Link to comment
https://www.sau.com.au/forums/topic/234357-gcg-highflow/#findComment-4109737
Share on other sites

Why rebuild or repair a turbo when its nearly the price of buying one new?. The HKS GTRS will love 2 bar.

:P ummmm for about 3 seconds before it pushes that much hot air it'll melt all 6 pistons.....way out of the GT-RS's efficiency rating.

Link to comment
https://www.sau.com.au/forums/topic/234357-gcg-highflow/#findComment-4109750
Share on other sites

Go onto youtube and type in hks gt-rs; there is a bloke who posted like 9 videos of his gtst with the gt-rs and it is amazingly responsive, frys the tyres very easily.

it will change your mind on the highflow.

+ 1

the turbo looks brutal. perfect upgrade for GTS-T

Edited by DrewII
Link to comment
https://www.sau.com.au/forums/topic/234357-gcg-highflow/#findComment-4109937
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...