Jump to content
SAU Community

Recommended Posts

Pics as promised. used my crappy phone camera but will take some better pics later on with a proper camera.

17x8 +17, 225/45 front

17x9 +17 235/45 rear

fronts stick out like 2~ish mm - prob will sit flush with a 215/45 tyre

rear fits perfectly fine - neither needed any guard work however the fronts needed the splash guards removed.

for the rears, if i was to choose new wheels, id go +13~ & for the fronts i'd go +20.

may lower it some more in future to get it sitting a bit better but im happy atm with its fitment.

wheel4ii2.jpg

wheel3rj0.jpg

wheel2hw3.jpg

Edited by dori32

I'm going some Work Emotion XD9s in bronze on my dark blue pearl R34 GTT Coupe, my car sits damn low, you have no hope of getting a coke can around the front or sides, only the back is a abit forgiving. Going to have streched tyres on her.

Front : 18x8, +35 offset

Rear : 18x9, +38 offset

I hope that it turns out okay and sits nicely close to the gaurds.

wouldnt need to stretch the tyres with the widths/offsets your getting for the 34.

for that width and offset 225/255s will be fine to fill up the guards.

if you want the a more aggressive look i'd go. 18x9 +20 215/40 and 18x10 +17 235/40.(or even 18x9+20 all round)

these rims from driftgarage are fken awesome!!!!!!!

for $1080 17" with good size & offsets, cannnot go wrong!!!

this is the new driftkteks atm.

everyone dick & harry is gonnna have them.

www.driftgarage.com.au

Dori,

I just went to their site and checked out the stock.

You were right !!!!!!!!!! Those Project D rims are absolutely awesome.

The price is also pretty bloody good. (if I had any money)

Many thanks for the web site link.

Regards

Jim (TR34GT)

UPDATE: found out my front tyres are 225/50 and i think thats why its scrubbing still!!!!

Hey Dori,

The R34 GTT has a standard 17"x 7.5 + 35 offset Nissan rim that is fitted with 225 x 45 ZR 17 tyres.

The link to the Aaron Bohnen tyre selection guide is listed below. (if you have Microsoft Excel)

If you type in the standard Nissan 17" profile mentioned, in the left hand column, you will be able to see the tyres which will match your car the best in various widths and diameters. It also gives you the information of speed differences due to the wheel diameter differences.

http://www.superjamie.net/garage/tire.xls

The tyre rating symbols for various makes are also as follows:

Tire Speed Rating Symbols:

S - 180km/h or 112mph

T - 190km/h or 118mph

U - 200km/h or 125mph

H - 210km/h or 130mph

V - 240km/h or 149mph

W(ZR) - 270km/h or 168mph

Y(ZR) - 300km/h or 186mph

ZRAbove - 300km/h or 186mph

Yep, the 225 x 50 tyre may cause a few issues in the scrubbing department, and you are also travelling faster than your speedo would indicate. ie........you would be travelling at 103.5 km/hour when you speedo is reading 100 km/hour.

If you save a copy of the guide, it will let you look at all sorts of combinations.

You may also like to check out the past issue of High Perfromance Imports which addressed the maximum diameter and widths that would fit under normal R32, R33 and R34 guards. Apparently, the R33 had the best factory widths for 18 x 8.5 and 18 x 9.5 fitments.

Safe motoring.

Regards

TR34GT (Jim)

Edited by TR34GT-000
I'm going some Work Emotion XD9s in bronze on my dark blue pearl R34 GTT Coupe, my car sits damn low, you have no hope of getting a coke can around the front or sides, only the back is a abit forgiving. Going to have streched tyres on her.

Front : 18x8, +35 offset

Rear : 18x9, +38 offset

I hope that it turns out okay and sits nicely close to the gaurds.

Why would you bother getting such horrible offsets when buying new?

Don't be weak, go 18x9 +20 front and 18x10 +18 rear. It'll fit fine with stretched tyres and a bit of guard love...

What about Just Jap for a set of R34 GTR second hand rims? Awesome!

I still like those freekin Lenso rims that Dori found. LOL

For mine, it'll be 17" x 8 front and 17" x 9 rear with some wide 235mm and 255mm Marangoni tyres respectively.

(dreams of more money)

post-55447-1222729394_thumb.jpg

What about Just Jap for a set of R34 GTR second hand rims? Awesome!

I still like those freekin Lenso rims that Dori found. LOL

For mine, it'll be 17" x 8 front and 17" x 9 rear with some wide 235mm and 255mm Marangoni tyres respectively.

(dreams of more money)

For R34,id stick to 18, 17" dont fill the guards quite well but im not saying 17s dont look good tho.

youd prob have to get bigger sizes for the rear, prob x10 lol

and front & rear with low offsets to fill the fat guards.. rear would be +12, fronts around +20ish

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sounds more like what Brad said, that it's mainly transfer. What pad bed in procedure did you use, and did you replace/machine the rotors, or just swap pads?
    • The stutter is almost entirely in the pedal. I don't feel the brakes release and reapply as you would with ABS engaging but the pedal feels that way, without the brakes releasing. It only lasts for less than a second and the pedal is fine again. It's hard to explain, sorry.  I'll get under this weekend and just double check everything is tight. Fluid is at max where I left it.
    • What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
    • Thanks, will do that.  Thankfully they still feel great.
×
×
  • Create New...