Jump to content
SAU Community

Recommended Posts

I have just been offered a good deal on multiple sets of these coilovers, but 3 sets are needed to get them at this price, they retail for almost double this

What: R33 & R34 Bilstein PSS9 Coilovers

Price: $2200 +$50max postage aus wide

When: As soon as 3 people put a deposit down, they are in Aus, so 1 week to you door max

Who: Contact myself via PM, Email or phone ~ [email protected]

Height and dampening adjustable, roughly 30-50mm drop is possible, inverted monotube design

Bilstein B16 – PSS9/PSS10 System

This “race inspired” system provides the ultimate in high

performance tuning. The manually adjustable damping

monotube gas shock absorbers feature 9 or 10-stage

precise compression and rebound settings, from comfort

to competition. The threaded body allows accurate

adjustability of the front and rear progressive rate

springs to achieve the vehicle ride height,

center of gravity and

level of performance

handling desired.

The Bilstein B16 system puts

you in complete control

providing the kind of precise

suspension tuning formerly

available only on race

cars. From a weekend of

competition to daily

driving, this system

provides perfect

handling

performance for

every situation.

Image below just for reference

{7B5E8DFA-DA5B-4B9F-00B6-689FDA000D4D}.jpg

For any more info just ask, I dont come onto these forums that much, but i will check back soon

Link to comment
https://www.sau.com.au/forums/topic/234685-r33-r34-bilstein-pss9-coilovers/
Share on other sites

Sorry they are for R33 & R34 GTRs only, they never did a pss9 for R32 or other gtst, ot that is still available today at least

But don't Bilstein do a coilover for the R32 GTR. I thought they did only recently. It wasn't a pss9.

I remember seeing it advertised for around the $4000 mark complete set.

I think they are 400lbs Front (approx 6 or 7kgs) and 450lbs Rear (approx 8kgs).........I'd prefer the other way around if possible.

Jude (CAZMAN) needs to confirm this though............soon I hope.

  • 2 weeks later...
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
×
×
  • Create New...