Jump to content
SAU Community

Cd Stacker


Recommended Posts

if you are refering to the bose factory 6 stacker built into the headunit then no. If its an aftermarket unit then maybe.

Bugger - that's what I was afraid of.

Thanks for the input guys

Cliff

Link to comment
Share on other sites

  • 4 weeks later...
Bugger - that's what I was afraid of.

Thanks for the input guys

Cliff

I think you can get a lead plugged into the back of the Bose for an MP3 Player (Ipod) though. Wouldn't imagine it is a big deal and then you could buy a big storage device and play it direct.

Even the SWC (Volume) would work too...

There is someone in this thread that could help...

Link to comment
Share on other sites

what lead do i need to buy for the ipod control and is it as simple as plugging it in and away you go?

im starting to get the shits with the stock bose cd player mine is skipping a bit here and there

Link to comment
Share on other sites

can you just add a A/V lead in the glovebox, connecting to the extra DTV-B tuner inputs?

if you can make that Nav on all the time with a flick of a hidden button, will that means the DTV-B tuner A/V inputs are no longer used by the nav, leaving it free for DVD-stacker plus one more, ie. the A/V lead I mentioned above?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Latest Posts

    • Took a little trip  went to nismo hoping the get my fuel tank hoses and unfortunately they told me they didn’t have stock luckily I was able to go to a Nissan parts store and they were able to order them in for me  then can home and cleaned the tank with some degreaser and fitted the new hoses before putting it back in the car 
    • 100% I’ll hack into the 33. Strap a turbo onto the RB25DE and/or put the 25 head on a 30 block. 33 passed in cos the reserve was too high. I’ll try lowballing it again and negotiate. Aim is to have it landed and on the road for under 15k, then spend the same amount on top in mods.
    • It's generally best practise to run 1x run without VCT enabled, then 1x run enabled till redline. Overlay the two torque graphs and you'll find the desired RPM to turn off VCT. Sometimes, it might be even worthwhile turning off VCT earlier control torque/cylinder pressure and using VCT purely to spool the turbo.
    • They sell them in Malaysia for about $4
    • First time I ever have issues with Amazon, but my wife often tells me to keep an eye out for fakes. It finally got me. I wrapped up the conversation with Gates. The gentlemen I was talking to seemed to hate his job but the response time on their technical support is outstanding. He stated that the hose is marked with some variation of "SAE J30R10" but that if you only purchase a 1 foot length like I did, it is possible to get a cut between markings and have a blank hose. To no ones surprise, he stated the swelling and "gummyness" isn't normal and to replace/buy from somewhere else (He mentioned NAPA). I'll toss a small end of the new one in gas for a few days before pulling the hanger out again, just to be safe.  Hose should arrive Monday. For those running multiple pump in tank hangers, you know the joys of getting them out and back in. I'm surprised I haven't destroyed my level float yet.  Lastly once I wrap all of this up, I'm planning on hitting the dyno again in 2 weeks while I'm on vacation. I realized recently that my VCT is set to turn off at 5000RPM. I'm surprised it wasn't increased while I was on the dyno last. I'm expecting I can increase it to ~6500RPM, if not more. Should hopefully get another 15-20kw out of it. I also want him to revisit my knock thresholds. I'm occasionally getting false knock around 3000rpm. 
×
×
  • Create New...