Jump to content
SAU Community

park fast.

hippy

By hippy,
in South Australia

 Share

Recommended Posts

  • 2 weeks later...
  • 11 months later...
phatgtst Contributor

phatgtst

Posted
Posted

GUYS let me clear some things up for you!!

NO one apart from the sa police and the local councils can ENFORCE a parking fine.

if the offending paper doesnt have a council logo or sa pol logo screw it up and throw it away! answer me this where are they going to get your personal info from???? it is against the privacy act for the rego dept to give out any info on ppls

rego's. next time you get a dodgy fine take it to the person who issued it and tell them that they have interfered with private property and tell them that if the y do it again you will stick it up their bung hole!!!

Link to comment
Share on other sites
Danish Apprentice

Danish

Posted
Posted

The company is owned or part owner by a tightarse called Damien Lester. His little posse of parking henchmen have started to clamp wheels if you don't pay for parking.

I used to never pay their dodgey fines that they stuck on my windscreen as they couldn't possibly enforce them. But now they will clamp your wheel and charge $100 to take it off.

The only way they can enforce fines is if you pay it, then they have your address for next time. The guy that goes around and does the fines drives a small black 2 door car that looks like a Toyota Echo, it has smart parking system decals all over it.

A bunch of dodgey pricks. I can give you the rego of his car and the rego of the guy that clamps wheels if you like.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      Big Brake Kit for ECR33

      By Dose Pipe Sutututu · Posted

      Really comes down to user requirements, I have found my 324mm 350Z Brembo front set up more than sufficient for track use, especially for Wakefield Park with good brake pads. At Sydney Motorsport Park the GP Circuit can be a bit taxing on the braking system, I find by the 3rd hot lap there's rapid degradation in braking performance but at that point non semi slick tyres are about to give up anyway. And yes, the brakes are effective, slowing me down from 230km/h+ each time going into turn 1. Street use, it's more than enough for street activities. Most of the time people complain their brakes aren't sufficient, it's due to incorrect bleeding, poor choice of friction material, or faulty master cylinders.
    • Kinkstaah
      Big Brake Kit for ECR33

      By Kinkstaah · Posted

      I'm about to sell my Attakd kit actually, so if you want a budget 2nd hand kit they definitely do work, though make sure you update your BMC when/if you do. Just keep in mind that buying pads (for any aftermarket kit) can be a bit more complicated when you have an aftermarket caliper. Not all brands make pads in the shapes and sizes you may want, no matter what you end up with.
    • deuceforty2
      Wiring loom difference between A31 A/T RB20DET and R32 M/T RB20DET?

      By deuceforty2 · Posted

      Hey guys, I had an R32 M/T RB20DET in my S13 quite a while ago, however I have replaced the chassis harness on the S13 and picked up a new motor (A31 A/T RB20DET according to the ECU) and I am having a hell of a time trying to figure out the dash wiring (specifically the black/pink wire for the fuel pump).  It seems this A31 loom is quite different at the dash connector and there is not even a black/pink wire anywhere on the engine loom (on one of the 5 dash plugs that are there), or on the ECU for that matter.  Every pinout I have seen is totally different from the actual wires on my ECU and i'm at a loss on how to wire this thing into my S13....     Any ideas?   In summary : A31 A/T engine loom/ecu pinouts are different than any pinouts i have seen online (specifically around pin 18 Fuel Pump Relay) 
    • robbo_rb180
      Big Brake Kit for ECR33

      By robbo_rb180 · Posted

      What are you doing with the car? Drags, sprints, racing? A decent upgrade of dba 4000 rotors, good quality pads (endless, project mu, intima are all I have used), quality fluid and braided lines. All have held up to multiple big track days and street duties. No need for big fancy kits as some also require significant energy to come upto operating temp. Look at 350z caliper and rotor upgrade too.  @Dose Pipe Sutututu comment on them and did a good write up.
    • robbo_rb180
      MLR's Bogan cruise ship

      By robbo_rb180 · Posted

      I've driven that one and it's a great deal and drives nice. The owner definitely treats it right on track. You would have gotten it for what you paid for this one too.   Keen to see what you do to this one. 
×
×
  • Create New...