Jump to content
SAU Community

Recommended Posts

Short version of story:

Been yellow stickered. They don't believe this is the stock turbo. Have to prove it, otherwise have to have emissions test.

So, here's the pictures. The car is a 1989 cefiro. Still has rb20 in it. I'm pretty sure the stock turbo is the T28, but I can't find any markings on the turbo to prove it. Apparently the huge amounts of rust isn't enough proof of its authenticity. I can read two of the markings. One has X19A on it, and the other has 2IU. No idea what they mean though.

img2143fd0.jpg

img2140kj4.jpg

img2137qg5.jpg

anything I should be looking for to prove that it's the stock turbo?

Link to comment
https://www.sau.com.au/forums/topic/235504-what-turbo-do-i-have/
Share on other sites

Short version of story:

Been yellow stickered. They don't believe this is the stock turbo ......Apparently the huge amounts of rust isn't enough proof of its authenticity.

The sad thing is these people are out there breeding :P You've been done by a complete c$#t, I'd ask for proof of their IQ (or lack of)

f**ked up, isn't it. They say because I have a blowoff valve on, that I OBVIOUSLY have a larger turbo installed too, therefore needing an emissions test.

Just called up a place called TurboTech, in perth, and they say that the stock turbo on all rb20det's is a hitachi HT18. Any confirmation on this?

Just talked to a nissan dealership person over east, who assured me that almost all the nissan turbos are Garrett. However they have used Hitachi on a few. No real help there. Come on, surely someone has to have a reliable source of information as to what the stock ceffy turbo is!

NEW UPDATE:

Here's a list of the responses I've got:

Turbo Tech: hitachi ht18

C-red: Garrett T3

Tanaga Motorsport: maybe T28, not sure though

MTQ turbos: t3 t4 hybrid maybe

Xspeed: hitachi. he sounded very sure of himself

Kensei Garage: garrett t3 (maybe)

Edited by scottrichards

The people who hand out the permits. the Tech department. They're the ones who want proof. Can't really get much better pics than that without taking it out ey. That's alot of effort. And i'm not too much of a fan of effort. I'm taking it to a turbo place tomorrow (hopefully) who will be able to identify it for me.

I'm also just going to remove the blowoff, so incase I don't have a stock turbo, they don't have any reason to suspect that it isn't stock at all. Removing the BOV will be a shit of a job though, as they bolted it together, THEN welded it on, making getting to the alan key bolts near impossible.

Jerks.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I was using the wiring diagram I have So 12.74V is coming into the rear Fuel Pump relay as I measured.  When I turn the key to ON im getting 0.6V to the Fuel Pump plug; which i assume is backfeed voltage and doesnt include the 12V from ignition power.  The rear relay is working and being triggered.  From the diagram I clearly see the rear relay 80 = Rear Relay going into the Body/H loom (R-27) 27 = Fuel Pump plug going into the Body/H loom (T-20) 40 = Short Connector (R-27) I'm reading 12.74V on the blue/black wire which is the power for the Fuel Pump   From this diagram I can see the Ignition relay goes into the front and up to the ignition  2 = Fuel Pump Relay <1M> (R-27) 37 = ING Relay <1M> I started from the pump using this reference Which the way I read it (referencing Nissan wiring color codes) is: Pin Wire Color Function 1 B/P (Black/Pink) Ground 2 L/W (Blue/White)        ECU Trigger 3 SB (Sky Blue) Fuel Pump 5 L/B (Blue/Black) 12V Constant Tested SB to SB on Fuel Pump for continuity - confirmed Tested negative on Fuel Pump to 12V battery and L/B - confirmed 12V Pulled the relay putting 12V between Pin 1 & 2 and testing continuity on Pin 3 & 4 - confirmed relay   So that has me looking at this part of the circuit to understand whats happening here...and im still confused. From best I can tell; the disconnect is back to my previous diagram; between Ignition Relay and Fuel Pump Relay...which yet again; afaik is where the immobiliser should.    Thats what I was trying to explain to GTSboy; im not trying to fix it myself; yet I seem to have to get a Masters in Electrical Engineering (while im busy doing my actual job of DevOps & Cloud Engineering) somehow.  I just wanted more expert opinions; or more so that what I tested is correct and proves it to something around that area; to go back to the alarm tech (for a 3rd time) that he needs to fix it. He keeps telling me its not the alarm. He lives on the complete other side of the city so i understand not wanting to make a trip but as I said before if its the alarm it should be up to him to fix it. But he's adament its not; even though I pointed out the FP was immobilised through the original alarm. To my mind; it seems that the ECU is sending the signal; but the ignition is not getting 12V down the line.       
    • Maybe also really stiffly sprung track cars. Get the inside wheel up in a corner and all the fun stops. Also me sometimes (rarely) when I have to stand on the brake to convince the diff to drive the wheel that is still on the ground when I'm trying to diagonally get over severe driveway entrance, etc.
    • I feel like I'm missing something. You had an authorised installer come out and install a new alarm. Post install the car doesn't start, and you aren't getting the installer back to fix what they did wrong?
    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
×
×
  • Create New...