Jump to content
SAU Community

Recommended Posts

Make:Nissan

Model:1994 Skyline R32 GTR

Milage:95,000 k's

Transmission:5 Speed

Colour:White

Location:Seaford, Melbourne

Complied?Yes

RWC supplied?No

Currently registered? Just paid 12 months rego

Price:$14000

Contact:Dale 0422 882 267

Comments / Modifications:

Images:

As above my GTR is for sale. One of the ceramic wheels let go and took out the engine. Did a compression test back a few months and a couple cylinders returned 0psi. Plans up until now were to fix however work has me interstate far too often. As per attached pictures, slight dent to rear right quarter (quoted $600 to repair/paint by Seaford Panels).

- 18" BBS LM Wheels (have gutter rash)

- 3.5" Kakimoto Racing exhaust. Legal db

- Front and Rear factory optioned strut bars

- MINES ECU

Any questions just ask. Cheers

Dale

post-1617-1221391592_thumb.jpg

post-1617-1221391767_thumb.jpg

post-1617-1221391883_thumb.jpg

post-1617-1221391936_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/236058-1994-r32-gtr-skyline/
Share on other sites

  • 2 weeks later...

buddy, dont mean to be rude but ur asking price is a bit high... i sold my r32 gtr with a blown engine and $10g worth of after market parts and 6months rego for $8000...so i think u should rethink the price or not sell at all...

bnr324, no offence taken mate.

fourth post down I revised it to $12500 and below that wrote taking offers (it's amazing how much the import scene has been affected with the price of fuel/new p-plate laws etc). so while 14k is too high, I don't think asking for offers from the revised price is unreasonable. I do think $5000 for a 1994 gtr with 12 months reg is however. Out of curiousity what year was the 32 you sold?

MP R33 keep up the great work

cheers guys

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
    • Correct. Um. I dunno. I haven't cared enough about the way that the NA cars work to know for sure. But..... The 33/34 turbo manual cars have an electronic speed sensor in the gearbox that outputs a +/- (ie, sawtooth AC) voltage signal. That is connected to the speedo. The speedo then outputs a 0-5v square wave (ie, PWM) signal that the ECU (and any other CU on the bus) sees. The speed sensor is NOT directly connected to the ECU. So here's the problem. Your new ECU expects to see the PWM signal, but must somehow be getting a direct signal from the diff speed sensor. Which would suggest that the wiring of the NA car is not the same as the turbo cars. I think you will need to spend some time with (hopefully the wiring diagram for the car) and a multimeter to see what is connected to what. Then, presuming I am correct**, you would then want to separate the ECU speed signal input from the rest of the car's wiring, and probably either buy a speed signal converter, or build one using an arduino (or similar). That would take in the speed sensor signal and output a scaled (and suitably rearranged) signal for the ECU. ** We shouldn't presume that I am correct here, because there might be something else crazy going on. I don't think you could convert the speedo to be fed from the gearbox sensor, because the pulse rate from that sensor is probably different to the diff sensor and then the speedo would read wrongly. And this also wouldn't fix the ECU's problem either, because the ECU doesn't want to see the gearbox signal direct either (assuming that they are all on the same wiring, for some odd NA related reason, see above caveat!) Does this help? Probably not. Can you make it work? Almost certainly. With the above work. You should buy a handheld oscilloscope from Aliexpress so that you can view these signals directly. Connect up the probes and drive the car. Show photos of the screen when drving at known speeds and connected to different places, and we'll see what we can learn about it.
    • Assuming your brake pads are not worn right down, I'd add a little brake fluid. Is there any sign of a brake fluid leak?
    • Hello all,  I need of some help. On my drive home my handbrake light lit up and started flashing. When I got home I checked my handbrake sensor under the centre console and nothing seemed out of the ordinary. I have scanned my car via the consult port, no codes shown. Checked my brake fluid as well which is half full. Tried unplugging the brake master but it didn't change anything. Thoughts on what it could be? The master float doesn't seem to be stuck. My car is an 1998 ER34 sedan GT. No hicas but has ABS Photos below 👇🏾 
×
×
  • Create New...