Jump to content
SAU Community

Recommended Posts

Hey guys my sr is making a tapping noise around 2-3k it started last night when I was like 25k's from home I drove home keeping it under 3000rpms.

If it is the bearing how good are the odds that I'm gonna need a rebuild? it was still driving fine when I got home? do you think It'll be right to just change bearings?

Cheers,

Russ

Link to comment
https://www.sau.com.au/forums/topic/238844-help-please/
Share on other sites

are you doing the work yourself or not ? If your paying someone to do it, once you have the engine out and open, it might be worth throwing forgies and a set of rods in there.. ($2k) since you're probably going to be paying that much in labour. Put a decent head gasket in there too.

in any case, if your not gonna replace parts, get them checked out thoroughly.. i'd say your crank will need machining at the least

Link to comment
https://www.sau.com.au/forums/topic/238844-help-please/#findComment-4174582
Share on other sites

Well your looking @ 1k for motor in/out before you start.

Then, if fitting new bearings your gonna have to machine everything to suit the 4 new ones you'll have to put in etc.

So 3k would be in the ball park as you cant really just swap one bearing, you do them all and freshen it all up.

You sure its a bearing?

Link to comment
https://www.sau.com.au/forums/topic/238844-help-please/#findComment-4174759
Share on other sites

pretty sure.. Its not something I have done before myself but a friend of mine done his in his silvia and said it sounds the same.. he's pretty in the know with these cars as he drifts and built his monstar, It seems to idle fine however if I give it a little rev it starts a knocking sound at 2-3rpms then clears up.. its a pretty loud knock very easy to here. and just sounds like it's coming from the head or front of the motor!

cheers

Russ

Link to comment
https://www.sau.com.au/forums/topic/238844-help-please/#findComment-4174858
Share on other sites

could be something in the head?

Im not up with whats inside SR heads, maybe a valve or something?

I thought a bearing knock didnt go away with RPM (as i did here a XR6t here and the knock only got louder with RPM), could well be wrong there

Link to comment
https://www.sau.com.au/forums/topic/238844-help-please/#findComment-4175019
Share on other sites

If you were giving it a good thrash just before it happened, its extremely highly likely its the bearings. Perhaps just look around on forums on here and boostcruising for someone who just wants to get rid of their sr, then all you have to do is take out the old one and put in the one you buy, then you have a whole motor sitting there for spares. I know my mate could have picked up a working ca for 150 im not sure on prices for the sr. But first thing you should do before you make any moves is get advice from a qualified mechanic and go from there.

Link to comment
https://www.sau.com.au/forums/topic/238844-help-please/#findComment-4175111
Share on other sites

I thought a bearing knock didnt go away with RPM (as i did here a XR6t here and the knock only got louder with RPM), could well be wrong there

spot on.

i would get a professional to check it out before you start spending big cash.

Edited by dmr
Link to comment
https://www.sau.com.au/forums/topic/238844-help-please/#findComment-4175620
Share on other sites

Possibly a rocker arm. My ca was doing a similiar thing but it was the big end bearings gone. Soon after that i threw a rod. Go and get it checked from a mechanic. ust to be sure. I am not sure if the guys on here are right about the bearing noise would not go away as mine always did. As soon as i got over a certain rpm it wnt away. DR drift tunes a mates car and heard the same noise on a smaller scale up in darwin and then stopped tuning but he said it was a bearing knock and that goes away.

Link to comment
https://www.sau.com.au/forums/topic/238844-help-please/#findComment-4177494
Share on other sites

its alot more difficult to diagnose a engine noise in a full alloy block as the knock resinates through it.

best way to do it is to take load of cylinder by unplugging coil pack plug or injector harness one at a time. if noise lessens on a particular cylinder when you do this you can be pretty sure it is down stairs.

SRs are renound for this, usually because the sump has been pushed up and seals the oil pick-up. Look under the car and see if the sump is dinted.

I did a big end set in a GTIR last week, cost the guy $800. this included genuine bearings, synthetic oil & filter. Done it in the car. No probs. Only thing to check is that the crank isnt damaged. otherwise its engine out and full build.

where would that sound come from? mine seems to be coming from the top of the engine on the exhuast side!!! dam car only had it a week :blink:
Link to comment
https://www.sau.com.au/forums/topic/238844-help-please/#findComment-4177795
Share on other sites

  • 2 weeks later...
The bearing noise would be there all the time man, there is no way that you feck a bearing and only hear it at a certain RPM.

i work with them all day lol.

Well actually, i KNOW from personal experience, that in my commodore (yes its not an sr) the big end bearings went on that, and before the motor died it made a knocking sound as you increased the revs and especially under load with the sound getting greater at heavier throttle. So yes, you do hear it at a certain rpm before the motor dies of course. The big end bearings can set your motors life short instantly, over very short time or could extend over a longer period of time depending on the severity of the damage to the bearings.

Link to comment
https://www.sau.com.au/forums/topic/238844-help-please/#findComment-4200919
Share on other sites

yeh I have no plans on spending cash at the moment LOL

It sounds like this.

this is not from my car but one on youtube doing the same thing.

Watta you think it is?

hmm that noise is weird as hell.....

any luck with the mechanic???

Link to comment
https://www.sau.com.au/forums/topic/238844-help-please/#findComment-4203266
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...