Jump to content
SAU Community

Recommended Posts

Make:1990

Model:R32 GTST

Milage:100,000km

Transmission:manual

Colour:white

Location:melb SE

Complied?yes

RWC supplied?possibly

Currently registered?yes

Price:12,500 make an offer please

Contact:pm or 0401 935 965

Comments / Modifications:

i have owned this car for 3 years now, i bought it completely stock for 14K, i drove it around for a year and a half then lost my licence for a year driving up to the snow, don’t go 80 over, iv only had my licence back for a few months now.

For the first year and a half the only mods I did were install a stereo which included sound deadening, custom speaker pods etc, cost me around 3K, ‘it was a waste, I know’

During the year I lost my licence I had the following work done;

Engine:

Rb25 hiflowed turbo

Tripple core radiator

Custom coolant lines to the turbo

Split 3inch dump

Straight 3inch exhaust with twin tips(sounds tuff)

Pod filter

Gtr cooler with custom pipes

Suspension/breaks:

Slotted front rotors

Tein hr coilovers

Interior:

I have since stripped from behind the front seat all the way to the back, all the sound deadening I put in was stripped, hence why it was a waste in the first place.

6 point bolt in cage

Steering wheel

Greddy elec boost controller

Greddy turbo timer

Iits got some real expensive boston acoustic splits in it as well as a pioneer amp which set me back a grand just for that.

Viper alarm

Exterior:

R33/200SX rims painted black (home jobby)

Bonnet lift bolts(look at the pic)

No spoiler

Body is in excellent condition

Guards have been rolled

Other:

The rubber induction pipe thingy, (adds 10hp)

Same with the heat shield for the pod

Also comes with:

Bosch 040 fuel pump

Gtr injectors and resistor pack

Z32 air flow meter

All the interior parts

I was planning on building a street/track beast but don’t have the time anymore, I started a new job and im not gonna be able to enjoy it, and plus I don’t really want the police attention, (im on one of those behaviour bonds) it has not been thrashed, its just waiting to have the other parts installed and tuned, hopefully see around the 200kw range.

It has been serviced by Nissan which has cost me an arm and a leg, quality parts have always been used, all service history is provided, I have spent thousands alone on servicing, I recently did the 100k service. It has never missed a beat.

Now the bad parts;

It has a dint in the front passenger side quarter panel

The bootlid has a home job paintjob so is not all that fantastic

The front bumper is black

Sometimes the globes in the speedo don’t work until you give it a lil tap, its only for one of the globes, when you turn them on you see that from like 120km onwards it doesn’t light up until you give it a lil love.

And thanks to the other half, the passenger side seatbelt is stuffed, I will replace this before sale

Its basically an unfinished project, all it needs is for the last few parts to be added on and a tune and should be good fun. All the stock parts are included so it shouldn’t be hard if you wanna get a roadworthy for it and use it as a streeter.

Make an offer cause this car is impractical for me and I really don’t need it.

chris

Images:

post-38932-1223636755_thumb.jpg

post-38932-1223636815_thumb.jpg

post-38932-1223636883_thumb.jpg

post-38932-1223636940_thumb.jpg

post-38932-1223637011_thumb.jpg

Edited by sky_high_psi
Link to comment
https://www.sau.com.au/forums/topic/239684-r32-gtst-melb-125k/
Share on other sites

hey man nice car looks like its had the $$$ spent in the right places.

let me know if you wanna part it out i'd be interested in cage, turbo, zaust etc could even organize a swap over if your keen....

good luck with the sale!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sorry to hear your HFM BM57 was faulty,  did you contact HFM I would hope they would be at least grateful for the information if there was some sort of manufacturing fault, you would hope they would be sympathetic even if your item was 2 years old if it had never been fitted. May I ask where it leaked from ?
    • Cats are called Bella, and Donna...  Like that poisonous plant And I remember your 2 monsters, I remember making a little bit of wee when you let them out... LOL I have already installed cat doors into the laundry where their kitty litter is, and the sun room, apart from the cat doors there's not going to be any permanent mounted stuff on the interior walls (interior doors are cheap and easy to replace) I will get a outdoor cat cage thingie once I finish the landscaping out back... https://catnip.com.au/ The only off limit areas are the main bedroom and the gym room....but, currently the cats are curled up in bed, in the main bedroom with the Mrs.....LOL, the off limits for the kittens to the main bedroom lasted about 5 minutes with Jackie I currently only have 1 free standing huge cat tree multiple level scratching post thingie in the lounge room, but, I will be getting another one soon now that I'm happy with the furniture layout in the back room and have a perfect spot for it  
    • All of this is making it seem clear that running the Coppermix twin was definitely the way to go, especially in hindsight with how insane tariffs have gotten and the strength of the USD vs yen at the time.
    • That sounds like no chance of even importing one for road registering then Now I see why Duncan wants to check LHD rules for Targa...   I wonder how "bolt in" the AWD would be if you got one imported from the US and swapped it to an AUD one
    • Not to mention they drive like a bucket of bolts! yuck!
×
×
  • Create New...