Jump to content
SAU Community

Recommended Posts

hey nath

there have been some tinting posts floating around that says that it is legal to have 20% for the rear window and 35% for the sides

I am not putting in my preference yet - but is that a legal combination?

One more thing - they put a little tint-a-car sticker once they have finished right? Will that mean that when the coppers complain and u show them u done it at a legit place they will leave u alone? hehe

no he doesnt put the sticker on unless u want it, mainly coz 99.9% of people take them off anyways

basically 20% is illeagal if its on your windscreen to your rear window or on your p*nis its illeagal, 35% is the darkest legal, windscreens CANNOT be touched and ther is no combination which is legal, 35% all round is the darkest legal you can have it

20% is very dark, it looks awesome but depends if your willing to sacrifice being defected :P personally i got 35% and find it juts nice

oh and if you get the illeagal stuff u dont get a receipt because basically 'he didn't tint it' if you get the illeagal stuff, he will still warrant it if it goes stuffed but otherwise you get no documentation, wheras with the 35%$ u get a writeen lifetime warranty

Scotty (Coupe)-10AM (???)

kC king_kw13's Friend (4 Door)-11AM (???)

Mo king_kw13's Friend (4 Door)-11AM (???)

hey i havent heard about what type of tint these guys wanted so i have to just put them all down for 35% (legal) as the guy needs to know today to order them, if you guys want illeagal please CALL ME on 0411 50 54 58 before 2PM this afternoon and tell me

cheers guys



  • Similar Content

  • Latest Posts

    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
×
×
  • Create New...