Jump to content
SAU Community

Recommended Posts

You might have a problem. Usually mixture related, possibly a faulty AFM, or bad tune on an aftermarket ECU. Going off the fuel gauge isn't very accurate though, fill it up and work out your L/100km.

Anything higher than 15 or 16L/100km around town usually indicates a problem. But even if it's fine, you can usually tune it and get it down to around 14 or less. Low 13's is pretty good, anything less is a bonus. On the highway you should be getting around 10 or 11 tops.

My r33 GTS4 (non turbo) has horrible fuel economy.. sure i do drive with the foot down a fair bit but even then i get around 16L/100KM.. i havent had it actually "tuned" since ive had it (1year) but i thought the ECU does that itself?

my car is fully stock, probably only spend about 20% of driving time with the bost gauge in the positive boost area.

so it would be a good idea to get some new plugs and clean the AFM?

if this doesn't work does anyone know of a good tuner arounf the liverpool area?

related threads on this topic are rampant throughout this forum, do a search and see what other people are saying....this only indicates you're not the only one who thinks they have fuel problems/issues - so is it really an issue or is it just paranoya???

imho, in sydney, because of the traffic and petrol quality i would be extremely surprised for a stock rb25 to average better than 350-380km a tank. i've noticed people from victoria with extremely good fuel consumption figures, but they dont have the traffic of sydney, they probably have better fuel & it depends on the type of driving they do...highway vs city

i have a powerfc tuned to about 12:1 AFR and i will consistently hit 400km with a mix of city/highway/full throttle. before the tune i would be lucky to get 380km per tank.

unfortunately, you can't tune your ECU as its stock. you will have to get an aftermarket fuel controller (apexi safc) or replacement ecu to do this.

how many km's has the car done? if its not time ie. 50,000 or 100,000km's you might try as everyone says, re-gapping your spark plugs, replacing your airfilter element, cleaning your AFM & replacing the fuel filter.

...but otherwise, live with it! its a 6 cylinder turbo. its a performance car. performance requires fuel. having said all this, you're still doing better, from a fuel consumption perspective, than a V8 or Rotary! :D

Hey franks, i was not complaining, just surprised, in my old 180sx (2ltr with 14psi exhaust etc) i used to drive with the throttle fully imbedded into the carpet most of the time and it still returned better figures than my skyline and this surprised me, that is all

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...