Jump to content
SAU Community

Recommended Posts

Hi, i get a rattling sound -I think its coming from my exhaust- at about 40k's.. when im revving it.....

when its on neutral it doesnt make the sound, only when im driving... i recently got my cat converter replaced so its not that, my muffler replaced (i thought it was that but it wasnt) so now i have no idea what it is and my mechanic doesnt know either.. any ideas? thanks

You would think itd be something like that, theres not much else it could be if its comming from lower areas near the exhaust :S

You said you replaced the cat and wasnt that, did they check the piping from the extractors etc? maybe something isn't holding/stuck there.

But the word rattling in general is quite broad without hearing the noise for ourselves...is it a deep rattling noise? A tinny rattling?

I don't know much myself but if it doesn't happen when your idling but happens around 40km/h and continues it could just be that a section of piping is loose and not held in place properly, and when more pressure is passing through, the noise therefore occurs??

I could be waaaay off the mark. Goodluck hope you get it resolved soon!

mines doing the same aswell and its a r33 like all of you, i sware it comes from the gear box........

i think it is bearings somewhere that are worn down?

the sound and where its coming from sounds like a bearing, are all of you getting the same rattle from the gearbox thats really deep at 1500rpm and once it hits 2000rpm its more of a quiet tin rattling sound then stops after 2000rpm.

anyone confirm that they think its bearings now

yeah. sounds like a deep rattle O_O it sounds like its coming from the exhaust to me (but it aint cos i got it checked out) Anyone HOW MUCH DOES IT COST TO FIX MORE IMPORTANTLY? aNYONE KNOW? APPROX?

I'm getting the exact same problem in my R33 SI GTS-T..

I just finished installing a FMIC (which was a bitch, damn clamps flying off) and only just started noticing it now that I'm listening extra carefully..

I did some diagnostic and noticed that if I push my clutch in while it's rattling the rattling immediately stops. I was in second gear, stock ECU.

Edited by Alinys

if it stops when you put the clutch in it could be the trust bearing but id be dam soprised if you could hear that making noise while ur actually driving! when sitting there ideling you can normally pick it because it will sound like something mechanical rattling around and when you push the clutch in it stops.

but i doubt it would be a thrust bearing.

changing the clutch and all components of the clutch soon (after my 50thou rebuild is back together in a week :P ) so ill soon be able to see if it helped me or if its a problem that nothing to do with manual and auto differences. it might be the cat r the muffler because there relatively close to the gearbox to be mistaken because its just a crazy noise =\

i got the same problems, with the stock muffler it was loud on take off. it rattle hard.

thought it was a broken muffler so i got a a cannon it was still there wasnt that loud tho. i was thinking it was the cat or the resonant

seriously its going to be the clutch or gearbox. THE SOUND IS A DEAD BEARING!!!!!!! thrust bearing probity auto or manual i guess its got to be the same component, that is if were are getting that noise that we all say we have. someone take phone and record it. my car has no engine in it at the moment because of mods so i cant :)

thrust bearing probity auto or manual i guess its got to be the same component

I think you will find that only manuals have a thrust bearing as it only works when with the clutch, i know the noise im talking about is not the thrust bearing as that is making a different noise :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...