Jump to content
SAU Community

Recommended Posts

Hi, i get a rattling sound -I think its coming from my exhaust- at about 40k's.. when im revving it.....

when its on neutral it doesnt make the sound, only when im driving... i recently got my cat converter replaced so its not that, my muffler replaced (i thought it was that but it wasnt) so now i have no idea what it is and my mechanic doesnt know either.. any ideas? thanks

You would think itd be something like that, theres not much else it could be if its comming from lower areas near the exhaust :S

You said you replaced the cat and wasnt that, did they check the piping from the extractors etc? maybe something isn't holding/stuck there.

But the word rattling in general is quite broad without hearing the noise for ourselves...is it a deep rattling noise? A tinny rattling?

I don't know much myself but if it doesn't happen when your idling but happens around 40km/h and continues it could just be that a section of piping is loose and not held in place properly, and when more pressure is passing through, the noise therefore occurs??

I could be waaaay off the mark. Goodluck hope you get it resolved soon!

mines doing the same aswell and its a r33 like all of you, i sware it comes from the gear box........

i think it is bearings somewhere that are worn down?

the sound and where its coming from sounds like a bearing, are all of you getting the same rattle from the gearbox thats really deep at 1500rpm and once it hits 2000rpm its more of a quiet tin rattling sound then stops after 2000rpm.

anyone confirm that they think its bearings now

yeah. sounds like a deep rattle O_O it sounds like its coming from the exhaust to me (but it aint cos i got it checked out) Anyone HOW MUCH DOES IT COST TO FIX MORE IMPORTANTLY? aNYONE KNOW? APPROX?

I'm getting the exact same problem in my R33 SI GTS-T..

I just finished installing a FMIC (which was a bitch, damn clamps flying off) and only just started noticing it now that I'm listening extra carefully..

I did some diagnostic and noticed that if I push my clutch in while it's rattling the rattling immediately stops. I was in second gear, stock ECU.

Edited by Alinys

if it stops when you put the clutch in it could be the trust bearing but id be dam soprised if you could hear that making noise while ur actually driving! when sitting there ideling you can normally pick it because it will sound like something mechanical rattling around and when you push the clutch in it stops.

but i doubt it would be a thrust bearing.

changing the clutch and all components of the clutch soon (after my 50thou rebuild is back together in a week :P ) so ill soon be able to see if it helped me or if its a problem that nothing to do with manual and auto differences. it might be the cat r the muffler because there relatively close to the gearbox to be mistaken because its just a crazy noise =\

i got the same problems, with the stock muffler it was loud on take off. it rattle hard.

thought it was a broken muffler so i got a a cannon it was still there wasnt that loud tho. i was thinking it was the cat or the resonant

seriously its going to be the clutch or gearbox. THE SOUND IS A DEAD BEARING!!!!!!! thrust bearing probity auto or manual i guess its got to be the same component, that is if were are getting that noise that we all say we have. someone take phone and record it. my car has no engine in it at the moment because of mods so i cant :)

thrust bearing probity auto or manual i guess its got to be the same component

I think you will find that only manuals have a thrust bearing as it only works when with the clutch, i know the noise im talking about is not the thrust bearing as that is making a different noise :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...