Jump to content
SAU Community

Recommended Posts

ing if i well after pulling my battery out for a charge i notices its only 370 CCA battery,

it normally takes 3/4 seconds to start, i am wondering if i need a bigger battery

x0x0x

Is that 3/4's of a second to start or 3 - 4 seconds to start?

I run an 'AllRounder' from Battery World in Fyshwick. Cheaper and has more punch than the typical Yellow Tops. It takes around 1/2 a second to 3/4 of a second to crank the engine over. The CCA on it I think is around 600CCA with a higher AH rating than the yellow tops. AllRounder Battery

Is that 3/4's of a second to start or 3 - 4 seconds to start?

I run an 'AllRounder' from Battery World in Fyshwick. Cheaper and has more punch than the typical Yellow Tops. It takes around 1/2 a second to 3/4 of a second to crank the engine over. The CCA on it I think is around 600CCA with a higher AH rating than the yellow tops. AllRounder Battery

cheers mate,

i ment 3 to 4 seconds,

I see the slightly longer start as a good thing. It gives the engine a little extra time to build oil pressure before being under full load... not a biggy for a standard engine, but it all helps.

Whatever Optima Yellowtop is. It's a deep cycle battery, meaning the charge level can drop to pretty darn low levels (ie won't crank at all) and still be recharged to normal :D Might come in handy Alex!

Whatever Optima Yellowtop is. It's a deep cycle battery, meaning the charge level can drop to pretty darn low levels (ie won't crank at all) and still be recharged to normal ;) Might come in handy Alex!

Same goes for the AllRounder I posted about Ben.

I had the Yellow Top in the Subie.. Excellent battery, but not for the price.. I got the AllRounder for half the price and it has a longer deep cycle charge.

(P.S - I just realised I said Battery World, but it is suppose to be "The Battery Factory")

Edited by sfrizza

I had a 440cca battery and it took maybe 2 seconds to start the motor, once that battery started to die (Scott - remember us roll starting my car in Kingston on Anzac day ;)) I chucked in a Supercharger brand 660cca battery. The fellow at battery world said it's the same cold cranking amps as you get in a Landcruiser.

One tap of the key and she fires first time every time, it's a good feeling lol :)

I can't even tell what mine is.... It's blue with yellow bits on top. It died one day and the NRMA told me it was f*ked and I really had to get to work so the NRMA dude in the battery van came along and changed it for me.

*shrugs* it works ;)

I had a 440cca battery and it took maybe 2 seconds to start the motor, once that battery started to die (Scott - remember us roll starting my car in Kingston on Anzac day :)) I chucked in a Supercharger brand 660cca battery. The fellow at battery world said it's the same cold cranking amps as you get in a Landcruiser.

One tap of the key and she fires first time every time, it's a good feeling lol :)

Yes i do.

Since running a oil cooler, i am paranoid about building pressure, so ignore me. :P

660cca is uber, will do the job fo shiz

yeh but i have that on my Landcruiser just to power accessories and a winch, must be some serious stereo to need as much battery power as that. :D

Mostly hidden. Some nice quality speakers in the rear and front doors with some Xcellent tweaters.

Work done by AudioTech Tuggers.

Put them in the GTS-T and then moved em into the GTR.

Edited by Sinista32
holy crap what size subs are they? my 12 doesn't take up anywhere near that much space

Could be the angle of the Photo's and the fibreglass sub enclosures. I cant fit much in the boot :P

2 x 12.5" Bostons = Heaps of DOOF DOOF (bass).

I dont turn it up till on the open road or at SAU Christmas party's at the Cotter. Sometimes it annoys me to hear it from cars round populated areas like the malls or local shops (fully sic mate!). I just think what a wank. A nice Skyline will get noticed anyway.

Most of the sound is restricted to the inside due to soundproofing from firewall to boot.

i went with a big 600cca cheap bosch and it works great

but 1100cca? thats nuts. what do you need that for? starting on a cold morning while doing a bit of arc welding at the same time?

hehehe I don't do things by halves :P

Errr - 2 Battery's. 1 to crank and the other to keep the stereo cranked.

I used to do that, to set it up right (and legally) there's a lot of shit involved.

Mostly hidden. Some nice quality speakers in the rear and front doors with some Xcellent tweaters.

Work done by AudioTech Tuggers.

Put them in the GTS-T and then moved em into the GTR.

Ooooh nice...

This is why I need the power :( and you can see that even though they call them a 'twelve inch sub' they obviously don't fit in a 12 inch hole :)

img001080349234tq7.jpg

picture2390281841qg6.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Has equal chance of cleaning an AFM and f**king an AFM. I think you can work out what happened. When the Hitachi ECU sees the AFM die and goes into the associated limp mode, then it will start and run just fine, because it ignores the AFM and just runs on idle maps that will do what it needs to get it going. But there is no proper load signal, so that's about all it can do. My suggestion? If you don't want to go full aftermaket ECU, then get some R35 GTR AFM cards and some housings to put them in, in the stock location, and Nistune the ECU. Better to do a good upgrade than just replace shitty 40 year old tech with the same 40 year old tech.
    • So my car was recently having trouble starting on initial crank, I would need to feather the gas for it to start up but besides that it would start and run fine. So I clicked the idle air control valve (with throttle body cleaner) and cleaned the MAF sensors (with MAF cleaner). The start up issue was fixed and now the car turns over without the assist of the throttle, but the car is in limp mode and wont rev past 2.5k RPM. From what I understand the IACV would not put the car in limp mode, so I am to believe it is the MAF sensors, but it was running fine before and now I cant get it out of limp mode. I cleaned the MAF made sure the o rings were seated properly. Made sure the cables were plugged in properly, the cables also both read the same voltage. Does anybody know why this is or what could be causing this or how to get it out of limp mode?
    • Ooo I might actually come and bring the kids, however will leave the shit box home and take the daily
    • Thanks. Yeah I realised that there's no way I'd be able to cover the holes with the filler, it would just fall through. Thanks again @GTSBoy!
    • That was the reason I asked. If you were going to be fully bodge spec, then that type of filler is the extreme bodge way to fill a large gap. But seeing as you're going to use glass sheet, I would only use that fibre reinforced filler if there are places that need a "bit more" after you've finished laying in the sheet. Which, ideally, you wouldn't. You might use a blob of it underneath the sheet, if you need to provide some support from under to keep the level of your sheet repair up as high as it needs to be, to minimise the amount of filler you need on top. Even though you're going bodge spec here, using glass instead of metal, the same rules apply wrt not having half inch deep filler on the top of the repair. Thick filler always ends up shitting the bed earlier than thin filler.
×
×
  • Create New...