Jump to content
SAU Community

Recommended Posts

hi guys,

i had my FMIC installed on tuesday and now whenever i hit full boost (10-11psi) the turbo emmits a really high pitched whine..

obviously the problems between the rb's and the 1j's will be different but the issues would definatly be similar with regards to turbos,

any and all information is much appriciated

cheers

nerm

Link to comment
https://www.sau.com.au/forums/topic/240553-turbo-issues/
Share on other sites

Best case scenario - you have a boost leak somewhere, check all of your silicone joiners, hose clamps and vaccum hoses on the intercooler system. Tighten them all and make sure that they are all sealing perfectly.

Worst case scenario - your turbo is on the way out. When a turbo squeals on boost it usually means that the compressor fan is damaged.

Example:

Myturbo2small.jpg

Link to comment
https://www.sau.com.au/forums/topic/240553-turbo-issues/#findComment-4201121
Share on other sites

I had no signs.... I just took off at the lights one day and the car spooled down faster than it spooled up and from there it just had absolutely no go whatsoever.

My ceramic exhaust wheel was found shattered into about a million pieces in the cat. Turns out the other turbo wasn't too far away.

Note to self, 20 year old stocky turbos don't like lots of boost :(

But turbos dying are a double edged sword. Bad cause it's expensive but awesome because you get more power!!!

Link to comment
https://www.sau.com.au/forums/topic/240553-turbo-issues/#findComment-4201294
Share on other sites

yeah it would be a leak as myn had the same thing after putting a boost controller on it turned out that the idiots at DTS but brass bolts on the zoorst housing to hold the turbo on i mean seriously wat idiots

Link to comment
https://www.sau.com.au/forums/topic/240553-turbo-issues/#findComment-4207131
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...