Jump to content
SAU Community

Recommended Posts

hey man yeah saw u give me the double thumbs up at the last second, im from bensville wbu?

Hey mate, do you have the blue or red 34r?.. Would love to see a red one in person is all.

hey man yeah saw u give me the double thumbs up at the last second, im from bensville wbu?

hahha yeah I was so happy to see a GTR in the area. I live up at Killcare just along the scenic road

and he's got the blue one anthony.... The red one had a black (maybe carbon fibre) bonnet and looked awesome. I've never seen it around before.

hahha yeah I was so happy to see a GTR in the area. I live up at Killcare just along the scenic road

and he's got the blue one anthony.... The red one had a black (maybe carbon fibre) bonnet and looked awesome. I've never seen it around before.

Cheers mate, would love to see it!

Saw SilverLure today on Empire Bay drive, car is sick man. Looks the goods. I was in the black 33, I've seen you filling up at the servo too

Thanks heaps man, I've put a fair bit of time into it for a gts and I'm stoked with how its looking myself :)

I've seen yours around a fair bit too, its absolutely immaculate. You live close by no doubt?

I expect to spot everyone at the pub in charlestown on the 8th

Check out the thread in the nsw event section, were having a meet and greet for the north coast guys!

You will spot me there in the 34!! :yes:

Should have the final tune this arvo!

No worries :)

Just saw the black gtt with gold "skyline" on the back, thought it may be you.

Have seen a black gt getting around, may have had gold writing.. May have been the same one...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
×
×
  • Create New...