Jump to content
SAU Community

Recommended Posts

Hi all, yes i do realise there is a number of threads about idle issues which i have read through but none of them come out with a successful solution. I have an r33 series 2 rb25, the car will usually have that hunting issue where its going between 0 and 1000rpm, sometimes it settles at idle and other times it will just stall. I have cleaned out the iac valve completely, replaced the gasket on the iac valve and secured all hoses i have touched and it hasn't made any difference at all. Does anyone know what to do to fix this?

Link to comment
https://www.sau.com.au/forums/topic/240711-stalling-idle-troubles-any-ideas/
Share on other sites

disconnect battery (bolt attaches to boot frame)

pump the brake pedal a few times

reconnect battery (bolt attaches to boot frame)

start car and let idle

it should sort itself out

if it doesnt go see a mechanic

base timing etc is probably whack

should be 15det BTDC at idle

i'm still tipping vacuum leak.

there are numerous hoses that might not have been checked from the front of the plenum to the carbon canister and under the cross-over pipe. this is worth another check. apologies if you have checked every single one.

i'm still tipping vacuum leak.

there are numerous hoses that might not have been checked from the front of the plenum to the carbon canister and under the cross-over pipe. this is worth another check. apologies if you have checked every single one.

you would hear a vacume leak though.... i did with mine.....

clean afm, change plugs,clean throttle body, do you have standard bov? i recon the most important culprit is the 02 sensor..... that $70 f#&ker stuffs things up when not working,,,,,, fixed my idle prob and now gives me better fuel economy...

sure it will paul.

i have had at least 4 deteriorating hoses on my car (over the years) and i have lost count of the cars of friends with splits in various vacuum hoses that hunt at idle. immediately idling fine after replacing the hose or trimming it back.

the last time i got the car back from the panel shop they forgot to reconnect one of the hoses to the carbon canister but due to its location under the snorkel it was a job to find in the dark with a little torch.

does the vehicle have any mods firstly and does it blow black smoke from exhaust at idle. if so make sure you have not blown an intercooler pipe. also could be a faulty afm. hope this helps

its fairly stock, apart from front mount intercooler and boost controller, it doesnt blow any black smoke at idle. im going to look into checking the error codes i was given that idea by a friend.

disconnect battery (bolt attaches to boot frame)

pump the brake pedal a few times

reconnect battery (bolt attaches to boot frame)

start car and let idle

it should sort itself out

if it doesnt go see a mechanic

base timing etc is probably whack

should be 15det BTDC at idle

thanks il give that a go tomorrow. theres a place near me called rpm performance north of brisbane, so that was my last resort if i couldnt sort it out myself.

you would hear a vacume leak though.... i did with mine.....

clean afm, change plugs,clean throttle body, do you have standard bov? i recon the most important culprit is the 02 sensor..... that $70 f#&ker stuffs things up when not working,,,,,, fixed my idle prob and now gives me better fuel economy...

il give this a go tomorrow as well. the bov is stock. after i try all this if im still having problems, il look into new 02 sensor.

$20 its the 02 sensor, especially if it hasnt been changed...... diconecting it wont change a thing if its not working in the first place paulr32...... what ever it ends up to be is just general standard maintenance anyway..... alll these things should be done anyway

  • 7 months later...

PLEASE HELP!!!!!! :)

Im having the same problem with the idle fluctuating (hunting). changed plugs cleaned iac throttle aac etc etc and it hunted usually between 1500-500 just changed the coils to splitfires now it does it 1000rpm-2000rpm. it isnt consistent it is intermitent. also car will just stall when clutch has been pushed in (giving it to it or sensible driving) checked ALL Vac lines aswell. also some times it will rev to roughly (i say that coz its never on the same spot its a bitch of a thing to trace) 3500-4500 and before i changed the coils it misfired then until the boost climbed it wouldnt rev anywhere near as quick then slingshot me (very dangerous in the wet) now after the coils are changed it does the same thing but it doesnt sound like its missfiring its alot quiter but same feeling NOTE: day night rain hail or shine it will do this problem sometimes does it when the car is cold but definatly when it has warmed up. sorry for the billion words hope it makes some sense

car details:

Series 1 r33 manual gtst

RB25det

splitfire coils

standard ecu

afm looks good and clean

vac hoses checked and some replaced

standard BOV

t4 turbo (was on the car when i bought it) standard exhuast manifold

standard exhaust

also just one more thing if someone has a couple of pics of a stockish engine bay can they post them

Edited by Melbourne93R33
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah I've had too many issues with knock off's on the BMW's. I don't want to do a job twice or more because the parts are shit.
    • I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
×
×
  • Create New...