Jump to content
SAU Community

Recommended Posts

  • Replies 188
  • Created
  • Last Reply

Top Posters In This Topic

Just thought I'd clarify for you guys wanting to block bov the coke can does the job perfecty. I did it today just for Shit and giggles and took me a whole 15 min just make sure you trace the bottom of bov on can and cut around the trace place cut out in between bov and the intake pipe mount Put back together and vwallahh you have flutter tutututu.

Btw this was performed on a standard bov and with a k&n pod filter.

Edited by Vlasi

Hahahahaha that's funny as madaz. skyhi its short for a blow off valve it is a valve that allows boost pressure leave your turbo system also makes A tsuuuuuu sound with standard bov and pod filter and you can get after market bov that makes a more defined tsuuuu sound

also makes A tsuuuuuu sound with standard bov and pod filter and you can get after market bov that makes a more defined tsuuuu sound

so, this tsuuuu sound, what does it do? like, i see the original bov has more u's after it therefore its a longer kind of sound right?

Edited by SkyHi_33

Some how this trick saved my a** tonight when the cops were doing their "part 2" at a RBT tonight. They were after a atmo BOV and they watched it while they got me to rev the hell out of the engine. All they heard was tsuuuuuuu from the turbo, then they were like that's ok!

Sometimes i feel sorry for them as they obviously did not have a clue, twice they looked over the engine bay before they asked "Where is the Blow off valve?"

My god they over looked the boost controller and solenoid, FMIC, POD, Exhaust, rim spacers, etc. Makes me think i could of had a high mount turbo and NOS kit and they still would just be after a BOV.

Madaz, they were pretty good about the whole thing but i remembered what i read sometime ago about these things. Which was not to offer too much info about anything in or on the car.

So that was you scandyflick out the front of Mayne Pharma that time? Its on the camera's man and she was actually 45!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...