Jump to content
SAU Community

Recommended Posts

Hey just wondering if anywhere is open on a weekend for me to get a tune as i live in victor harbor and it is hard to get a day off during the week just for a tune. If ther is can anyone recommend a good tuner?? Cheers jarad

are you after a tune, plugs/oil etc or a just a dynotune???

what ecu are you using??

Aussie exhaust and dyno will do it on the weekend for you

Yeah i want to try aussie exhaust and dyno some time soon aswell, mainly becuase one of the guys is a very regular helpful user on here. hes got a pic of a r33 in his sig or avatar im thinking. Seems like a top bloke by what he posts.

Ive also used boostwerx and they were good, but i also like supporting the smaller guys too!

just after a tune and check over dont need service only changed oil and filters last week just running stock ecu wher bouts they located?

corner of port/south rd hindmarsh next to the car wash look for the yellow building ask for michael

I dont think speed lab does rb25's he is a specialist at rb20's went to take it to him before, so who will tune my car on a saturday and can do a half decent tune with stock ecu?? I would like to do it this weekend if possible cheers

if you want a full tune, call jeff from speedlab, as we use the rb20 computer when tuning the rb25's.. yea u loose ur vct but the extra power you gain after having it tuned will be better anyway! jus so you know.. the most we have ever seen the vct make is 8kw! that is by doing a run and then un-plaging it and doin another run back to back!

jeffs the man! :P

if you want a full tune, call jeff from speedlab, as we use the rb20 computer when tuning the rb25's.. yea u loose ur vct but the extra power you gain after having it tuned will be better anyway! jus so you know.. the most we have ever seen the vct make is 8kw! that is by doing a run and then un-plaging it and doin another run back to back!

jeffs the man! :P

Cheers moo_r32 would u happen to hav a contact number for jeff?

if you want a full tune, call jeff from speedlab, as we use the rb20 computer when tuning the rb25's.. yea u loose ur vct but the extra power you gain after having it tuned will be better anyway! jus so you know.. the most we have ever seen the vct make is 8kw! that is by doing a run and then un-plaging it and doin another run back to back!

jeffs the man! :P

You obviously dont know the concept of the VCT then mate, It's not about helping outright power, vct is to assist with bottom end torque, Look at the power curve on a before and after run and notice the bottom end will be a fair bit different....VCT turns off after 4000rpm anyway so that 8kw had nothing to do with it.

Save some pennies and get a Power FC mate.

Edited by Ryanrb25

if you cant find a RB25 pfc get a R32/33 GTR one :P thats what im doing but thats due to AWD not working properly on the RB25 one i had

but Cubes along with Boostworx have done the R&D on making them work with RB25's

Depending on what mods you have you may not need either a power fc ($1000+) or a remap ($550+). Your best bet is to call up Shaun from boostworx (+1) and see exactly what he recommends as the most cost effective solution to get what you want from your rb25det.

Ryan

F@*k now i dont kno wat to do lol, spoke to speedlab today he was gona remap a rb20 ecu and tune for 550, last dyno i had my car got 220rwkw at turbo tune (same dyno speedlab uses) which he said was good usually 33's make near that mark with remap. Im now thinking just buy power fc and i should be able to get more power out of my car. Dont really want to spend 550 to get similiar power would be pointless. Wher do u get power fc's from and how much? anyone kno how much boostworx charged to tune and install one??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • haha don't worry I'm sue you've got more fun ahead buying a 30 year old turbo car....but at least you are in the right place to ask
    • some days eh? The keyless entry and interior light on/off with the key will be controlled by the Body Control Module, but I'm not certain where that is or what it looks like (you might get lucky with a search to get a part#, which could be printed on it). I'd start at the A pillar/ Under dash/kick panel on the driver's side
    • It might be hit and miss, but Nissan Genuine Parts and Pitworks are not the same thing, although both are available from Nissan Dealers with Nissan Part Numbers. Nissan Genuine Parts are the OEM stuff, Pitworks are their attempt to get people back from generic parts makers
    • I did end up getting it sorted, as GTSBoy said, there was a corroded connection and wire that needed to be replaced. I ended up taking out the light assembly, giving everything a good clean and re-soldered the old joints, and it came out good.
    • Wow, thanks for your help guys 🙏. I really appreciate it. Thanks @Rezz, if i fail finding any new or used, full or partial set of original Stage carpets i will come back to you for sure 😉 Explenation is right there, i just missed it 🤦‍♂️. Thanks for pointing out. @soviet_merlin in the meantime, I received a reply from nengun, and i quote: "Thanks for your message and interest in Nengun. KG4900 is for the full set of floor mats, while KG4911 is only the Driver's Floor Mat. FR, RH means Front Right Hand Side. All the Full Set options are now discontinued. However, the Driver's Floor Mat options are still available according to the latest information available to us. We do not know what the differences would be, but if you only want the one mat, we can certainly see what we can find out for you". Interesting. It seems they still have some "new old stock" that Duncan mentioned 🤔. I wonder if they can provide any photos......And i also just realized that amayama have G4900 sets. I'm tempted too. 
×
×
  • Create New...