Jump to content
SAU Community

Recommended Posts

  • Replies 58
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Yea from 3 to 2 lanes just past the truck inspection bay.

But there is a flash unit behind it. I think its a speed camera, but the camera full points towards the other side of traffic. Check it out next time and see for yourself.

I drive to gong nearly everyday so i will keep a look out for a new speed camera sign (if it is a speed camera)

Comes to a point where you just say no more..

I want to take an angle grinder and go to work on as many fixed speed cameras as I can.

I agree lets cutem down!just another revenue raiser.

If they where serious they would make the vehicles attend the RTA to qualify the defect, then get repaired the said problem.

Edited by YLD-CHLD

I think they are targeting trucks using compression brakes,,,not us. Let face it,,,going down Ousley would normally be done on a trailing throttle,,,no skylines going to break the limit of a noise box.

Oh and some of my good old friends are bikies,,,sure their bikes are loud,,,but they are cool dudes.

Neil.

hard to pin a recording of air brakes on a particular truck...

From what I've read, the system uses several microphones. If they're directional enough, it shouldn't be impossible to triangulate the source of the noise.

Putting it on Mt Ousley Rd, on such a steep section of road, is just bollocks if you ask me. There's not much by way of housing out there, and there's sound barriers, and I'd rather there be a little noise than trucks having no brakes at the bottom of the hill.

From what I've read, the system uses several microphones. If they're directional enough, it shouldn't be impossible to triangulate the source of the noise.

Oh trust me, I know how that part of it would work :)

My point is, you would still need a picture of the vehicle in question. You can't just play back a recording and be like, "I put it to you mr trucker sir, that these ARE your air brakes..."

My point is, you would still need a picture of the vehicle in question. You can't just play back a recording and be like, "I put it to you mr trucker sir, that these ARE your air brakes..."

The system takes a 10 second video recording to go with the audio and triangulation data.

Wonder how many DB a joint fart can produce.

I reckon we just find out where the mics are, and just set up a birdseed tray in front of them.

Some of those birds make a massive racket, and if the government tries to shoot or poison them all those nature types will kick up a massive stink.

Bonus points for someone who can figure out how to make a kookaburra shit on the camera lens.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...