Jump to content
SAU Community

Recommended Posts

Well I think this graph speaks for itself :(

http://www.x-rates.com/d/JPY/AUD/graph120.html

Since July 21 the value of the AUD dollar to the Yen has almost halved in value. Depressing sign to see that many of the parts coming out of Japan will almost be double in price to what it was about 3 months ago. Damn depressing to see but lets hope it picks up again as fast as it dropped so we can get decently priced parts out of Japan once again.

Link to comment
https://www.sau.com.au/forums/topic/241853-the-yen-vs-the-aud/
Share on other sites

Any parts worth buying in Oz...

Cant see the Oz dollar coming back for awhile..Expect to see the Yen and Green back strong for awhile...

I feel sorry for poor buggers from oz doing snow trips here..their cost of the accomo has nearly doubled ...

I managed to get in a set of nismo injectors, bride seats and rails before the dollar droppped ;)

I just paid 1650 trade price for a nismo gt lsd pro tt model 1.5 way, it hurt but it was better than another quote i got for 1860 :S

I sill have a clutch and rims to go, i dont know how long i can wait for the dollar to improve, i know nismo will stop making the rims at some point :P

i thought you were over the poncams thing?

Nah lol. I finish uni exams in a few weeks and start working more hours during the holidays so gonna take the head off and do some work to the car, havn't really done much to it lately. Got the gasket kit, valve springs, arp head studs etc, just need to get some poncams. Wondering whether to bite the bullet and just fork out the ridiculous price for all the parts these days...

I bought my GTR when it was like 105 yen, so i was very lucky!

+2 near the hundred mark and before the luxury car taxes!!

4.6million yen was the cost of the car; now would be the high side of 80thousand before importing and taxes.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...