Jump to content
SAU Community

D.i.y Stop Open Door Beep For R34!

R34Liner

By R34Liner,
in Tutorials / DIY / FAQ

 Share

Recommended Posts

R34Liner Proficient

R34Liner

Posted
Posted

Hello Everyone!

A few week ago I was looking at this D.I.Y >> http://www.skylinesaustralia.com/forums/To...mp;hl=stop+beep in the hope of stopping my beep - but this method only seems to work on <R33. So I opened up my baby and had a crack - and I succeeded! Very easy - very quick - and no damage to anything - it's just a simple disconnecting of a plug :)

I have Found no Side effects to any other system - I have a Auto Watch emob. and it still works fine - also this will not get rid of the beep for when you leave your lights on and open your door - also does not effect the door open lights on/off function

What you need:

RATCHET

10mm Socket

Phillips Head Screw Driver

Your Keys! <you will see why ;)

(Next 2 items are handy to have close if needed - but not essential)

Flat Head screw Driver (with double sided stick tape with one side still covered with plastic wrapping to stop sticking) < I use this to wedge open anything that is hard to open up - the double sticky tape prevents scratching because its spongy - very useful for when you need to take out air con vents on the R34 etc. as well.

And my trusty Victorinox Swiss Army Knife :)

t_0001139m_6e9c7b5.jpg

(CLICK ON PHOTOS FOR LARGE PICTURE)

Step 1: Unscrew Lower cover

t_0001138m_689594e.jpg

Left Hand Side of Lower Panel (Phillips head screw driver)

t_0001132m_8618887.jpg

Right Hand Side of Lower Panel (you will need 10mm socket)

t_0001130m_fe9c8bf.jpg

Here you will have to disconnect all Wires and thread them through any holes so you can remove the whole cover and put it out of the way

t_0001129m_73ab14c.jpg

Step 2: Unscrew Steering wheel under cover

t_0001127m_64f22cc.jpg

Open the Steering Wheel Adjustment Leave Right out so that it doesn't get in your way - also so that you can move the steering wheel up and down to help wiggle the case off

t_0001122m_be80390.jpg

Step 3: Remove the demand Beeperiser Plug

Your Undercover should look like this now - if not - you have gone astray and need to revert back to step 1 and/or you have the wrong car and revert back to top link!

t_0001118m_d25dda1.jpg

See that white plug well - Now you hear it!!

t_0001116m_559f008.jpg

Now you don't!! - Now just rap that sucker around some wires and make sure the little slider inside the plug is OFF - this is what your keys are for!! Before you go and put it all back together put the key in and make sure it is in the off position otherwise it will forever be beeping :(

t_0001115m_3ee528f.jpg

Enjoy the sweet sweet sound of beeplessness ;) and your stereo when you want to work on your car :)

If you need any help just post or Pm me :)

Aron

Link to comment
https://www.sau.com.au/forums/topic/242701-diy-stop-open-door-beep-for-r34/
Share on other sites
  • 2 weeks later...
  • 4 weeks later...
twoskys Newbie

twoskys

Posted
Posted

Legend :)

Will try that out in the weekend. Main motivation being the ability to listen to the stereo at low volume while working on the car...high volume kills the battery and low volume gets killed by the BEEP.

Was this trial and error for you? with all the tips involved you would tend to think so hehe..

Thanks again

  • 1 month later...
Charbzilla Apprentice

Charbzilla

Posted
Posted

Cool thanks i just did it!!!! fantastic!

U don't need to remove the lower panels - only the steering wheel cover

Just remove the steering wheel panel (Start from STEP 2), to get to the white connector and disconnect it. Only need a philips screwdriver for the job.

  • 2 weeks later...
  • 2 weeks later...
Silver_GT Collaborator

Silver_GT

Posted
Posted

Im Pretty sure jaycar have a kit that will have your lights work like normal (ie. still turn on without key) but turn off when you take out the key after driving, much like a commodore. Dont quote me on it thought, definantly somthing useful however.

  • 4 months later...
  • 2 months later...
R34Liner Proficient

R34Liner

Posted
  • Author
Posted
Will this get rid of the annoying beeping sound when your car is in reverse?

Nope, i don't spend much time in reverse so it doesn't bother me that much. But if you do want to remove it i cant imagine it would be very hard....just find the beeper and cut the wire...

  • 5 weeks later...
  • 4 years later...
klebestift Apprentice

klebestift

Posted
Posted

Anyone have any clue which plug I'm looking for? Pics above don't work and I've tried a few white plugs but none of them are turning the beep off. Here's a pic from under the steering column.

post-125345-0-29644500-1411784850_thumb.jpg

klebestift Apprentice

klebestift

Posted
Posted

Too late to edit previous post, I had only tried a few plugs cause I was too scared of unplugging the airbag. Eventually worked out the airbag is the bright yellow plug so I got more adventurous with the white plugs.

The plug that controls the key-in-ignition signal is a T shape white plug on the underside of the ignition barrel. It looks like the photo below when unplugged. You can unplug the white end or the other end (small brown connector above ignition barrel) with the same result:- no ignition + open door beep, keep headlights + open door beep.

post-125345-0-32613100-1411825312_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Ben_D
      Wanted to buy R200 longnose LSD 3.9 ratio

      By Ben_D · Posted

      Hi all,  I am in the market for an R200 longnose diff out of a Z31 300ZX, or S12 RSX, DR30 skyline, or similar, in a 3.9 ratio.  Preferably a late model one with the M12 crownwheel bolts.  The only easy to find advert for one of these was my ad back in 2007 when I sold it on this forum.  I sold the diff as I had sold the car it goes to, but as it turns out, after 18 years I got the car back late last year, so now I'm looking for the diff !  If anyone knows where to find a longnose R200 LSD with the M12 crownwheel bolts, drop me a line at [email protected] - Bonus paid if soomeone comes up with the original diff (stranger things have happened !).  Cheers   Ben D    
    • Ben_D
      Back for more after 18 years - and where are the longnose R200 LSDs?

      By Ben_D · Posted

      Hi everyone, I used to post here a bit from 2004-2013, when I owned various Nissans, in particular my S12 RSX gazelle, which was sold in 2007.  As luck would have it, after an 18 year hiatus, the car found its way back to me last year, and over the past 11 months I have had the pleasure of restoring it with my kids.  One thing that I am after in particular is a 3.9 ratio R200 LSD for it.  I actually sold the one out of the car here back in 2007 , and it would be incredible if I could track down who I sold it to, so I can see how they have progressed over the years (and to be honest, to see whether I can get the diff back !).  Anyways, hi all and let me know "where are the R200 Longnose diffs all at these days ?  Cheers Ben D  
    • sonicii
      G35 Control arm and Compression Rods into a V35 Skyline.

      By sonicii · Posted

      Arms will be the same as the G35 or 350Z, but as above, there was a change in the lower control arm where it connects to the ball joint.  That said, you can remove the ball joint cone from your old ball joints and fit them to the new ball joints.  To be honest, I didn't think the ball joints themselves were different. The main ball joint is a bit awkward to replace, you really need to remove the steering knuckle to press out the old one.  Some people have used tools to remove it in place, but it just seemed too hard to get to. If you are going to press out/in that ball joint, then you may as well just replace the bushings in the LCA and the compression rod.  You can buy the compression rod bushing from Nissan, but the LCA bushes, you will need to go aftermarket. Much cheaper than buying the whole arm.
    • Erelyes
      Ceramic turbine damage to engine - what did yours do?

      By Erelyes · Posted

      Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
    • Dose Pipe Sutututu
      M35 Aftermarket Fuel Pump

      By Dose Pipe Sutututu · Posted

      Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
×
×
  • Create New...