Jump to content
SAU Community

Recommended Posts

does it happen to be when the engines cold? thats when the most fuel is being pumped into the engine and i sometimes get that smell. its normal.

but if its just when your driving then you may have an exhaust leak.

hey guys,

i have an r33 non-turbo and every now and then i get a strong smell of petrol in the cabin. im just wondering if anyone would know where it would be comming from and how i could fix it?

cheers.

have u inspected all the hoses n pipes 4 leaks in the car front 2 back???

also inspect the fuel filler neck. during compliance they put in a new fuel filler insert to accomodate the australian fuel nozzles, sometimes they don't seal it properly and you will get fuel leaking when you turn left. mine used to do this when i first got it. pulled out the insert, cleaned up all the old sealant and put some Selley's "knead it" around the insert and pressed it back in. hasn't leaked since.

yeah it is when the engines cold, not too sure if any new work has been done i only brought the car about 3 weeks ago. i is due for a 200k service if that would effect it. haven't had time to have a go at fixing it. hopefuly one of you guys is right, cheers for the feed back. skyline australia is so much easyer to get info from rather then ford forams which i used to uce because i had an el.

Edited by PandaR33

Dude.. at 200,000 km. in Australias Hot conditions I got $100 that sais is the hoses in the boot.

Continue to follow the lines through th chassis too. May need replaceing and as Matt said, canister hoses. And watch your fuel consumtion bottom out :P

Edited by GTS4WD

200k .. =\ theres your reasoning..

Hoses for sure. Its gonna' be annoying following them through the whole cabin, but your gonna' have to do it.

Also check seals and all.

I was dreading my 100k service.. but 200 seems worse now lol.

MRXTCZ

also inspect the fuel filler neck. during compliance they put in a new fuel filler insert to accomodate the australian fuel nozzles, sometimes they don't seal it properly and you will get fuel leaking when you turn left. mine used to do this when i first got it. pulled out the insert, cleaned up all the old sealant and put some Selley's "knead it" around the insert and pressed it back in. hasn't leaked since.

damn this is the problem im having too lol

i used some special hard glue shiet and it works for awhile then ends up popping off.

i tried metal epoxy b4 and that shiet is strong as.

but ill try this knead it sealant next time round if it pops off again.

if i dont wash the car for a week, i can see petrol splash marks from the petrol cap to the rear bar lol

  • 2 weeks later...

well my brother has the same problem in his commodore

we took it to a mechanic and he said its the injector seels

i no there 2 different cars but they might have the same reasons

any answers pm me

i hate the smell of petrol in the car it gives me a headache, so i no what your going through

:(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ahhh, I need the whole head unit. I definitely needed to roll back through and review your setup, ha ha! Neat setup they have going on. I just need a full double din head unit. But I want good and responsive. I might have to review what the likes of pioneer have out these days.
    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
×
×
  • Create New...