Jump to content
SAU Community

Recommended Posts

Hi all,

The first group buy seemed very popular so i thought i would do another, however due to higher courier costs and exchange rates the price has risen slightly. But still the price is still very low for a high quality Helligkeit HID kit:

German name Brand Helligkeit HID Kit,

post-32255-1225494696_thumb.jpg

Simplified wiring which eliminates any unnecessary confusion during install.

More than 16+ bulb types.

0.3% failure rate, compared to 3-10% failure rate of other HID Conversion kits currently out on the market, the reliability is comparable to that of OEM HIDs

Color temperature output has tolerance of +/- 100K, the tolerance is unnoticeable by human eyes

Superior lumen output compare to its competitor

Best quality burners from Hella

Choose from 6 different color temperature, you will indefinitely find the color output of your choice German name Brand Helligkeit HID Kit, simplified wiring which eliminates any unnecessary confusion during install.

The price is $135 Delivered anywhere in Australia

Please PM me with your order and specify what temp and bulb type you would like.

3000K(Golden Yellow), 4300K(Crystal White), 6000K(Diamond White), 8000K(Diamond Blue), 10000K(Aqua Blue), 12000K(Brilliant Blue)

post-32255-1225494743_thumb.jpg

post-32255-1225494759.jpgpost-32255-1225494786.jpg

Group buy ends 31st of December, please PM me for an order :O

Link to comment
https://www.sau.com.au/forums/topic/242766-hid-group-buy2/
Share on other sites

  • Replies 102
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

so how bight does it go up compared from 3000 through to 1200 and also the differences in bulbs....and how hard is it to hook up?

i'm a bit of a newb when it comes to lights...but i would be interested in some.

Edited by Gus-
Link to comment
https://www.sau.com.au/forums/topic/242766-hid-group-buy2/#findComment-4233886
Share on other sites

Kelvin rating has nothing to do with brightness.

All temps are brighter than halogen globes, though for a nice bright white beam i would suggest either 4300k or 6000k.

Link to comment
https://www.sau.com.au/forums/topic/242766-hid-group-buy2/#findComment-4233897
Share on other sites

I only have a H3 bulb type in the normal kit, but there is a listing for a H3C in the slim line ballast kit which are more expensive. They are about $100 more.

PM me if you would like to make a order.

Link to comment
https://www.sau.com.au/forums/topic/242766-hid-group-buy2/#findComment-4246113
Share on other sites

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...