Jump to content
SAU Community

Recommended Posts

Hi all,

The first group buy seemed very popular so i thought i would do another, however due to higher courier costs and exchange rates the price has risen slightly. But still the price is still very low for a high quality Helligkeit HID kit:

German name Brand Helligkeit HID Kit,

post-32255-1225494696_thumb.jpg

Simplified wiring which eliminates any unnecessary confusion during install.

More than 16+ bulb types.

0.3% failure rate, compared to 3-10% failure rate of other HID Conversion kits currently out on the market, the reliability is comparable to that of OEM HIDs

Color temperature output has tolerance of +/- 100K, the tolerance is unnoticeable by human eyes

Superior lumen output compare to its competitor

Best quality burners from Hella

Choose from 6 different color temperature, you will indefinitely find the color output of your choice German name Brand Helligkeit HID Kit, simplified wiring which eliminates any unnecessary confusion during install.

The price is $135 Delivered anywhere in Australia

Please PM me with your order and specify what temp and bulb type you would like.

3000K(Golden Yellow), 4300K(Crystal White), 6000K(Diamond White), 8000K(Diamond Blue), 10000K(Aqua Blue), 12000K(Brilliant Blue)

post-32255-1225494743_thumb.jpg

post-32255-1225494759.jpgpost-32255-1225494786.jpg

Group buy ends 31st of December, please PM me for an order :O

Link to comment
https://www.sau.com.au/forums/topic/242766-hid-group-buy2/
Share on other sites

  • Replies 102
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

so how bight does it go up compared from 3000 through to 1200 and also the differences in bulbs....and how hard is it to hook up?

i'm a bit of a newb when it comes to lights...but i would be interested in some.

Edited by Gus-
Link to comment
https://www.sau.com.au/forums/topic/242766-hid-group-buy2/#findComment-4233886
Share on other sites

Kelvin rating has nothing to do with brightness.

All temps are brighter than halogen globes, though for a nice bright white beam i would suggest either 4300k or 6000k.

Link to comment
https://www.sau.com.au/forums/topic/242766-hid-group-buy2/#findComment-4233897
Share on other sites

I only have a H3 bulb type in the normal kit, but there is a listing for a H3C in the slim line ballast kit which are more expensive. They are about $100 more.

PM me if you would like to make a order.

Link to comment
https://www.sau.com.au/forums/topic/242766-hid-group-buy2/#findComment-4246113
Share on other sites

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
    • Nah, that is hella wrong. If I do a simple linear between 150°C (0.407v) and 50°C (2.98v) I get the formula Temperature = -38.8651*voltage + 165.8181 It is perfectly correct at 50 and 150, but it is as much as 20° out in the region of 110°C, because the actual data is significantly non-linear there. It is no more than 4° out down at the lowest temperatures, but is is seriously shit almost everywhere. I cannot believe that the instruction is to do a 2 point linear fit. I would say the method I used previously would have to be better.
    • When I said "wiring diagram", I meant the car's wiring diagram. You need to understand how and when 12V appears on certain wires/terminals, when 0V is allowed to appear on certain wires/terminals (which is the difference between supply side switching, and earth side switching), for the way that the car is supposed to work without the immobiliser. Then you start looking for those voltages in the appropriate places at the appropriate times (ie, relay terminals, ECU terminals, fuel pump terminals, at different ignition switch positions, and at times such as "immediately after switching to ON" and "say, 5-10s after switching to ON". You will find that you are not getting what you need when and where you need it, and because you understand what you need and when, from working through the wiring diagram, you can then likely work out why you're not getting it. And that will lead you to the mess that has been made of the associated wires around the immobiliser. But seriously, there is no way that we will be able to find or lead you to the fault from here. You will have to do it at the car, because it will be something f**ked up, and there are a near infinite number of ways for it to be f**ked up. The wiring diagram will give you wire colours and pin numbers and so you can do continuity testing and voltage/time probing and start to work out what is right and what is wrong. I can only close my eyes and imagine a rat's nest of wiring under the dash. You can actually see and touch it.
×
×
  • Create New...