Jump to content
SAU Community

Recommended Posts

Make: Nissan

Model: R34 GTR

Transmission: 6 spd man

Colour: White

Location: Perth

Currently registered? Until March 2009

Price: $50000

Contact: PM me here and i will give out mobile phone.

Comments / Modifications:

Greetings all!

Unfortunately the time has come to sell my GTR. The reason being is that i just dont drive the car anymore and would rather it go to someone who is actually going to use it. The car was imported over around march this year in which i drove it around on NSW plates (then realised it was illegal to drive it around with these plates on). Since then it has been garaged basically until now in which i took it over the pits to get registered here. Since i have owned it i have only travelled roughly 5000kms. The car had 35,646km on it before the aftermarket nismo cluster was fitted, in the meantime it has done 19,034km making a combined 54,680km.

It is sad to see this car go as this was my dream car, but my priorities have changed now (will be moving shortly) and i cant justify sinking money into the car anymore. The car is immaculate. There are no interior blemishes at all. There is only one scratch on the front bar, and one underneath the right sideskirt (not done by me, done by previous owner in Japan). I have driven the car like a sissy and it has basically been babied (took it to the drags once, thats about it).

The car came with an exhaust (3" catback, unsure of cat, and front pipes, not sure what brand but has jasma plates on them) and some HKS Pod filters, in which i have remove and installed an ARC Induction Box.

3" Exhaust

ARC Induction Box

Aftermarket Head unit and fron speakers (Optional?)

Nismo cluster

I think the price is fair given how much GTR's cost now with the fall of the aussie dollar. I am in no real rush to sell either.

Take it easy,

Matt

post-11654-1225587746_thumb.jpg

post-11654-1225587793_thumb.jpg

post-11654-1225587803_thumb.jpg

post-11654-1225587959_thumb.jpg

post-11654-1225587974_thumb.jpg

post-11654-1225587987_thumb.jpg

post-11654-1225587996_thumb.jpg

gtr_auction_rep.PDF

Edited by kessian
Link to comment
https://www.sau.com.au/forums/topic/242891-1999-r34-gtr-skyline/
Share on other sites

  • Replies 85
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • @Haggerty you still haven't answered my question.  Many things you are saying do not make sense for someone who can tune, yet I would not expect someone who cannot tune to be playing with the things in the ECU that you are.  This process would be a lot quicker to figure out if we can remove user error from the equation. 
    • If as it's stalling, the fuel pressure rises, it's saying there's less vacuum in the intake manifold. This is pretty typical of an engine that is slowing down.   While typically is agree it sounds fuel related, it really sounds fuel/air mixture related. Since the whole system has been refurbished, including injectors, pump, etc, it's likely we've altered how well the system is delivering fuel. If someone before you has messed with the IACV because it needed fiddling with as the fuel system was dieing out, we need to readjust it back. Getting things back to factory spec everywhere, is what's going to help the entire system. So if it idles at 400rpm with no IACV, that needs raising. Getting factory air flow back to normal will help us get everything back in spec, and likely help chase down any other issues. Back on IACV, if the base idle (no IACV plugged in) is too far out, it's a lot harder for the ECU to control idle. The IACV duty cycle causes non linear variations in reality. When I've tuned the idle valves in the past, you need to keep it in a relatively narrow window on aftermarket ecus to stop them doing wild dances. It also means if your base idle is too low, the valve needs to open too much, and then the smallest % change ends up being a huge variation.
    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
×
×
  • Create New...