Jump to content
SAU Community

Recommended Posts

Hi all,

I have a set of KYB model number 341287 front shockers that I am looking to replace my tired worn ones in my Series 2 4WD.

Problem is that when I took them out of the box and measured the length up against the originals, the KYB's were about 20-25mm longer.

Now this promts me to ask whether they are in fact R33 GTST or R33 GTR? the suppliers reassure me that they are for the R33 GTR according to KYB listing. I remember reading somewhere that the R33 GTST's are a bit longer.

I will also be fitting lowered Kings springs (R33 GTR) to work with the KYB shocks but am concerned about the shock travel characteristics with the lowered springs as they are already longer than original (springs 30mm-40mm lower + shocks are 20-25mm longer = 50-65mm less travel in shocks than they designed for). Will they bottom out?

Questions;-

1. Is the 341287 KYB the correct part number to use for the Stagea?

2. Also does anyone know of any alternatives readily available at a reasonable price?

Nissan Aust original are about $400/pair + 2 week wait Japan.

Bilstein's are about $590/pair (B46 2107 FR Bilstein Sport B6 R33GTR)

Thanks, do you know what the correct KYB part number is?

You won't get anything in oz, you will only get japanese domestic model KYB's that are made for Stagea's, or are you after the R33 GTR ones ?

Hi all,

I have a set of KYB model number 341287 front shockers that I am looking to replace my tired worn ones in my Series 2 4WD.

Problem is that when I took them out of the box and measured the length up against the originals, the KYB's were about 20-25mm longer.

Now this promts me to ask whether they are in fact R33 GTST or R33 GTR? the suppliers reassure me that they are for the R33 GTR according to KYB listing. I remember reading somewhere that the R33 GTST's are a bit longer.

I will also be fitting lowered Kings springs (R33 GTR) to work with the KYB shocks but am concerned about the shock travel characteristics with the lowered springs as they are already longer than original (springs 30mm-40mm lower + shocks are 20-25mm longer = 50-65mm less travel in shocks than they designed for). Will they bottom out?

Questions;-

1. Is the 341287 KYB the correct part number to use for the Stagea?

2. Also does anyone know of any alternatives readily available at a reasonable price?

Nissan Aust original are about $400/pair + 2 week wait Japan.

Bilstein's are about $590/pair (B46 2107 FR Bilstein Sport B6 R33GTR)

I got my Bilsteins (in NZ) for about half that by getting a set that had been traded in .The Bilstein trained guy reconditioned and valved them to suit my Stagea - you could try phoning around.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...