Jump to content
SAU Community

Recommended Posts

hey guys

just wondering. i just purchased a set of garrett 2860 -7's for my 33gtr and i will be using the stock ecu til i save up some more money. Question is.: would it run and be ok with 12 psi of boost with the stock ecu?

also how would it go with these mods for power. just want to keep it simple and mild.

internally stock gtr.

pfc ( soon)

cooler is bigger than stock 100mm thick+ hiflowed metalic cat

3 and 1/4 cat back + jjr front pipes

apexi pods

also can the stock gtr ecu be remapped?

thanks pplz :D

Anth.

Edited by R33GOD
Link to comment
https://www.sau.com.au/forums/topic/244159-just-bought-new-turbos-for-the-r/
Share on other sites

I am not exactly sure but i would say it would be ok to drove it only if you treat it nicely, no thrashing as the ecu might have a fit. It probably wont run very well. Id stick with the pfc i know you can remap the gtst so i am sure you could do it to the gtr.

Try ringing a workshop if your not sure.

It can be remapped, but I believe it's a good idea to wait until you get the power FC anyway. That way you only need 1 retune. I mean, unless you're really nervous about one of your ceramic turbos... just wait IMO. Occasionally they get sold on here for 600-$1,000 sometimes with a commander etc. Keep an eye out.

Definitely go power fc; at least you will have a factory ECU spare for EPA

1500-1900 will get you the fc + handcontroller + tune

plus you can always add mods and have a quick dyno tune to get them to run optimally

it'll run fine.. -7s r like N1 turbos anyway

the comp will be fine.. im running -10s with my stock comp.. but only on 7psi lol but still!

and it runs it with 272deg cams in n out and plenty of other work... sure its been remapped b4 to run bigger turbos in japan, but they werent overly massive... just under 300kw on pretty much 16psi...

The stock comp remap allows u to stay legal somewhat... u could always argue its stock :P

yer stock fuel pump should be fine.. im still running the stock fuel pump n injectors.. although @ near 300awkw.. they were startin to run real lean... so im gonna need new injectors or atleast a nice hike in fuel pressure...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...