Jump to content
SAU Community

Recommended Posts

got a brand new in box Blitz LM Sus panel power filter - blue in colour.

fits all skylines, 180sx,s13,14,15 etc.

check model listing.

$50 pick up in syd + $10 post if needed.

0413544494 or pm if interested.

blitzfilterbb1.jpg

fits:

SKYLINE GT-R BNR32 RB26DETT 8/89-11/94

BCNR33 RB26DETT 1/95-12/98

BNR34 RB26DETT 1/99-

SKYLINE HR31 RB20DE(T) 8/85-4/89

H©R32

HNR32 RB20DET 5/89-7/93

H©R32 RB20DE 5/89-7/93

ECR32 RB25DE 8/91-7/93

ECR33 RB25DET 8/93-5/98

ER33

ECR33

ENR33 RB25DE 8/93-5/98

ER34 RB25DET 6/98-

RB25DE

#V35 VQ25DD

VQ30DD

VQ35DE 6/01-11/06

CPV35 VQ35DE 1/03-11/06

SILVIA

(200SX) (K)S13

CA18DE(T) 5/88-12/90

(K)PS13 SR20DE(T) 1/91-9/93

©S14 SR20DE(T) 10/93-12/98

S15 SR20DE(T) 1/99-

180SX (K)RS13 CA18DET 3/89-12/90

(K)RPS13 SR20DE(T) 1/91-12/98

300ZX PZ31 series RB20DET 3/87-

HZ,KRZ,KRGZ31 VG30 series

PULSAR GTI-R RNN14 SR20DET 8/90-12/94

also got a turbo off a VQ30DET motor.

very minimal shaft play.

will fit on a RB maniufold in stock position if a RB rear housing is used (just swap it around) this turbo has got a fat mid range & very torquey, like a VG30DET and more torquey then a RB25 turbo.

pics:

turboif7.jpg

turbo2dc9.jpg

$300 neg

Cheers

Edited by dori32

added: leather nismo gearknob $30, good condition

nismogearknobkh0.jpg

price drop: $270 on the VQ30DET turbo.

for more info, visit www.vq30det.com

also got a supra intercooler (end tanks on same side).

$40

26306838.P1800ESTurbovaiksed050.jpg

Cheers

Edited by dori32

the vg30 rear is a direct bolt on no need to change it, thats what im using now, great to bolt onto the back of an rb25 highflow.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
×
×
  • Create New...