Jump to content
SAU Community

Recommended Posts

Hey guys got my Dyno the other day and here is the image of the Dyno Sheet. The Ai-Fuel Ratio is completly all over the place im supprised it got 217KW without a Tune on my AFC Neo which i have no idea what to map it.

Mods are:

* Z32 300ZX Single Turbo 45v3 Turbo

* FMIC setup

* Stock AirBox

* Walbro 050 Fuel Pump

* SARD Fuel Pressure Regulator

* APexi AFC Neo

* HKS SSQV BOV Plump Back

* 3'' Cat Back Exhaust Mild Steel

* Gizzmo MS-IBC Electronic 6 Stage Boost Controller

* Low Boost 8.5psi , High Boost 13.4Psi

Whenever my car is running high boost only there is a crazy screaming kinda sound (Dentist Drill Kinda Sound) i've checked everything that my mates think it is like Boost Controller and the BOV Leaking and it's nothing like that so im thinking it might be the actual Turbo? Maybe the waste gate isn't staying closed and its creeping open under full load i've got no idea

001dr9.jpg

Edited by gL3nJaMiN88
Link to comment
https://www.sau.com.au/forums/topic/244633-new-dyno-results/
Share on other sites

hey champ,

looks like your reading is about 20 to 30 rwkw to high.

it was done in shoot 6, this will always read high.

even 200 is optamistic with a vg turbo. the CHRA is exactly the same turbo as an RB20 turbo, the only differences is the exhaust housing really.

i am not putting you down at all but your real power figure is more like 190rkwk. cheers :D

Yeah well im not 100% sure what your saying is right before i put this turbo on the stock R33 S2 turbo was on there and on around 10psi it made 206rwkw and now its got the electronic boost controller and different turbo i can feel the power is alot more. I left a 06 WRX STI for dust last night but im taking my car down drags so we'll see how it goes now. i understand where you coming from but , ill get another dyno if someone can recomend one around Penrith , NSW there is complete shit all around here for dynos

dentist drill noise? does it have trouble responding now? like its laggier? had the same noise from a GCG hi flow n it turned out to be a bearing failure, the noise was from the compressor rubbing against the housing. Would probably take your turbo intake off and see if it looks cactus.

really ? well it boosts up nice and fast and comes on hard . Just the noise is really weird and it only comes on around 3500-5000 then goes away its when the thing hits full boost .. It kind of sounds like it gets faster whining sound . i dont notice anything in performance loss just the noise is making me worry lol anyone else know what this could be . and yeh its only on high boost modes? maybe there is a bleed valve on my solenoid?>

the dentis drill noise

start you car up and stick you head in the engine bay next to the eshaust manifolds and get someone to rev the car slightly and see if you can hear air escaping.

sounds like your exhaust manifold stus are broken and theres a gab in your manifold. i had this also when i had my 33. on full boost get a screashing noise like the dentis drill. found out 3 broken manifold stud.

also your car is not stock.

stock is stock as in no mods. you put an exhaust in your car that moves you away from the stock ppl

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...