Jump to content
SAU Community

E . O . I: 6 And 8 Piston Big Brake Packages


Recommended Posts

Hi all,

Im very keen on getting a big brake upgrade for my R33, the supplier ive been in talks with told me if i can get 5 kits ordered for a group buy the saving on each kit would be very substantial.

So here is the info:

6 and 8 piston calipers

330mm,356mm and a massive 380mm rotors

Rotors can be either grooved or slotted

Kit contains:

Two front 2 piece rotors

Two 6 or 8 piston calipers

Braided brake lines

Dog bones

Pads

You can choose from silver,red and blue.

Slotted version

post-32255-1226663304_thumb.jpg

Grooved version( very similar if not the same as this)

post-32255-1226663595_thumb.jpg

Prices will be between $1699 and $2199 delivered.

Good news is these kits are interchangeable with AP items and come with a 6 month warranty.

If you are interested please feel free to ask questions and ill do my best to answer.

:banana:

Good news is these kits are interchangeable with AP items and come with a 6 month warranty.

does this mean you can use AP pads .?

with the 6 pot kit or 8 pot

so what would it cost me to get a 6pot kit delivered to Adelaide 5013 please im interested as the car goes in this thursday to get worked and ill need bigger brakes after its done.

Good news is these kits are interchangeable with AP items and come with a 6 month warranty.

does this mean you can use AP pads .?

with the 6 pot kit or 8 pot

so what would it cost me to get a 6pot kit delivered to Adelaide 5013 please im interested as the car goes in this thursday to get worked and ill need bigger brakes after its done.

Yes its suited for AP pads.

Your kit will be $1799 Delivered.

Is everything in this kit ADR compliant?

Im not quite sure ill have to ask. Though im sure most aftermarket performance brake products on the market today are not.

Yes its suited for AP pads.

Your kit will be $1799 Delivered.

cool bear with me i just need to decide 356mm or bigger but ill get back to you asap when ive made my mind up

cool bear with me i just need to decide 356mm or bigger but ill get back to you asap when ive made my mind up

You are limited to your wheel size.

330mm for 17 inch, 356mm 18 inch and 380mm 19 inch wheels.

how long does this gb offer go for i wont have the $$$ for a couple off weeks took the car to get rebuilt with a new motor yesterday

but anyway put me down for 6piston 330mm rotor for my r33 4 door ill try to get the cash together abit quicker to you as you need payments first.

cheers

Allan

You are limited to your wheel size.

330mm for 17 inch, 356mm 18 inch and 380mm 19 inch wheels.

Dave, 380mm and 18" works, just need the right offset and spoke design, eg driftek 18" should clear 380mm discs.

Well, i hope so! Ive measured them up against my brakes and they seem fine, mine are AP 6 fronts 380mm, rears are AP 335mm

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...