Jump to content
SAU Community

Recommended Posts

im after a shifter for a rb box but i am a little confused bout the different types of shifters

i have seen pictures on ebay of nismo solid shifters and the r34 has a kink in it but r33 ones dont

so is it possible to get pictures of stock shifters from a r33 and r34 rb25det shifters so i can compare them?

thanks in advance!!

What one are you after?? If you are looking for an R33 one I bought one by accident (meant to get the R34 one), will sell less than advertised on ebay if that is what your after..

PM me if you are interested mate.

ok i couldnt find any pics on stock shifters but on ebay there are 2 nismo solid shifters

r33

http://i57.photobucket.com/albums/g219/jdm...hifterrn580.jpg

r34

http://i57.photobucket.com/albums/g219/jdm...shifterer34.jpg

now can anyone confirm if the r34 really does have that kink in the stick?

cheers

Yes 34 does have a kink in it and it is needed

thanks heaps mate!

=)

thats the answer i needed to kno!

=)

couple more questions... is the kink to put the shifter further back? or further forwards?

and i assume rb25 boxes from a r33 are the same from a r34?

The kink brings it into the cabin but you dont even notice it because of the covers. If u have a 34 you need 34 box as they came out with pull style clutch and from memory there are a few updates with regards to syncro rings etc that make them last longer and stronger. i also think the nylon bush on the end of the selector may be a different size but not 100%

Edited by cankas
  • 4 years later...

hello,

I know this thread is a bit of a blast from the past (but it shows I've used the search button!)

Are the shifters interchangeable without any problems?

I have an R33 Box in a VL with an R33 Nismo shifter which sits fine, but if I go to an R34 box (for pull clutch setup) will the R33 shifter still sit in ok?

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So it should work in my case?  I does not say R34 but it say push(i have push gearbox/clutch right now) No i wont...and i do not drift/race or do anything crazy with car so even a small box should be ok for a couple of months
    • Ha ha, yeah, I've had one following me around in my parts boxes since about 2007 I believe. Just a little iddy bit hole drilled in the one I have to let it vent out once pressure was removed from the engine side. Still no idea what I'd put it on, ha ha.
    • Just read this... Just a little bit of a wild one! Do you think the driver was testing out a new feature/device for how to lose the cops in a high speed chase?   I also suspect, if the box has a road sweeper that does magnetic metal pick up, he does a LOT of work in the machining industry. Which is what most of that looked like, machining chips from a mill or lathe. And I bet they're RAZOR sharp! And from an environmental perspective they really do need to actually collect all of those little pieces too. I wonder how many people still cop flat tires over the coming months on that road?   As for insurance company, yeah, it'd be interesting to hear what they say to the owner. But realistically, he's right, that "It's his fault". In the way that, it was his truck that spilled it, so they need to clean it up. However, neither he, nor his insurance company may bear the end cost if they do an investigation and find out it was caused by someone elses negligence (And they know who)...
    • Yeah, no matter what bad things people can say about Julian from Autospeed, he at least was capable of thinking and his inclusion of a check/relief valve in the plumbing for the Audi boost controller, that I made a copy of and used for years**, completely eradicated that problem. **It's still lying on my workbench where I put it about, um, 18 years ago and have never found a home for it!
    • I didn't actually know this! I've seen photos of the H1, mainly outside shots, and they just look "different". I guess there'd be a few little changes like nicer rims, and probably the fact they have nicer looking paint with some depth and shine, which will make any vehicles body look different to the very flat colours of the defence force.   I've watched the guys on GHPC convert their Humvee to LS1, and they've done some really nice front shock upgrade. I'm waiting for the next video on it with the rear end done. I can't remember if they've already done it, or I dreamed it, but I believe they're also supercharging theres. They will be in the future doing proper long travel suspension too.   If you ditch out your big V8, as rubbish as it must be, send it to my place. I'll let the unreliable V8 motor and box be here. I just like V8s... So I'll find something to do with it... Even if that something is just taking up valuable space in the yard. I might have something Skyline I can send back in payment... Or even Ford Barra motors  (From memory you're in Canada yeah?) So you can then play with the legendary Aussie 4L version of an RB...  Except they don't have that distinctive random miss at idle like the RB25 does.
×
×
  • Create New...