Jump to content
SAU Community

Recommended Posts

hey

I currently own an R34 and i have backfiring issues. I just wanted ask how to fix this problem. Is it really a major issue and whats the consequences of not fixin this problem? Also what causes this backfiring problem.

The car is currently runing stock boost and stock everything. I just added an air filter and a bov.

Thanx ppl :)

Link to comment
https://www.sau.com.au/forums/topic/24513-back-fire-issues/
Share on other sites

I think maybe u missing the cat and running too rich mate!!

But that's good, my car have a 1/2m dia. fire ball when dyno

If you want to stop the backfire, buy a SAFC or have ur ECU chiped. it can allows u to set the fuel and air ratio. U can come to BMT and ask for DR. Drift in Melbourne

Link to comment
https://www.sau.com.au/forums/topic/24513-back-fire-issues/#findComment-523182
Share on other sites

hey thx ppl for the advice...

I'm waiting for the SAFC ... hey r32impul.. how much is it to get a chipped ECU from BMT ? i just want to know the price. I think i should go get the car checked out from a professional just in case. Dont wanna do shit myself since i know shit about car.

Friend said that if i dont get the backfiring sound outta the way, it mite blow my cat convertor and its gonna waste more money then fixing it now.

LoL sorry this is a stoopid question, what does rich and lean mean when its about engines? To fix that u need a SAFC ?

=] thx ppl

Link to comment
https://www.sau.com.au/forums/topic/24513-back-fire-issues/#findComment-523204
Share on other sites

Rich means more fuel in your fuel air mix, lean means less. The SAFC will allow you to tune your mix thus stopping the back fire.

The stock computer calculates air using your air flow meter, and assumes the air will still be around when your throttle body closes. Hence it puts more fuel into the mix.

(well put simply.. if anyone was to elaborate be my guest)

Link to comment
https://www.sau.com.au/forums/topic/24513-back-fire-issues/#findComment-523216
Share on other sites

hey guys - sorry but i am worse than charlie34.

So the backfire is caused by the car running rich (can it be cos of the 3" dump back i got and no electronic supports??) and that is causing the detonation of unburnt fuel in the exhaust? So any sort of management that will alter the air/fuel ratios to let it run more lean should eliminate this right?

Link to comment
https://www.sau.com.au/forums/topic/24513-back-fire-issues/#findComment-528918
Share on other sites

Originally posted by charlieR34

hey thx ppl for the advice...  

I'm waiting for the SAFC ... hey r32impul.. how much is it to get a chipped ECU from BMT ? i just want to know the price. I think i should go get the car checked out from a professional just in case. Dont wanna do shit myself since i know shit about car.  

Friend said that if i dont get the backfiring sound outta the way, it mite blow my cat convertor and its gonna waste more money then fixing it now.  

LoL sorry this is a stoopid question, what does rich and lean mean when its about engines? To fix that u need a SAFC ?

=] thx ppl

PM me for discussion on your options for a R34. Had another 34 GTT in the other day that was detonating severly as someone had moved the CAS.... looks like a checkup on the dyno has aved him a motor....

Doc.

Link to comment
https://www.sau.com.au/forums/topic/24513-back-fire-issues/#findComment-531587
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah I've had too many issues with knock off's on the BMW's. I don't want to do a job twice or more because the parts are shit.
    • I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
×
×
  • Create New...