Jump to content
SAU Community

Recommended Posts

hey guys i am in melb and about 2 months ago i brought an r32 gtst that came with a canary and no rego....

im not wanting to sell the car but if i can get around 10k for it ill sell it straight away the only thing that needs to be done to it is it now need to be taken down and be tested for sound pollution i also need to put the rear tyres on it that i brought last week but if i was to sell it ill do that straight away..

now about the car!

it was built in november 1992 its black in colour manual 5 speed has 152000kms on the clock, T3 hyflow turbo, front mount intercooler, turbo back 3 1/2" exhaust sys, it has been remaped by dr drift it got 159rwkw on 11psi... i have lost the dyno sheet but i do have another copy in the car from when it was 1st tuned with a stock exhuast and pulled 146rwkw dont ask why it was tuned with a stock exhuast i have no idea why!!!!

its got 18" rims on it there 5 spoke akukzas and there like a silver polished kind of metal when i got the car the interior was pink with thalaw stitched in to it i have dyed the back seats with black dye and put seat covers on the front if anyone is interested i can throw in r33 stock front seats...

hrrm i also have a sard fuel regulator that i hav not put in yet... all that is needed now is a z32 air meter, gtr injectors,gtr resistor pack and a cam gear for the car to pull over 250rwkw....

i might be able to help out with the z32 airflow meter if someone wants the car...

as i said ealrier i just seeing if i can fetch around 10k for the car if not ill just keep it finish off the mods and see if i can get a little more later if pics are need i will post them just ask!!! thanks all for looking!!!

Link to comment
https://www.sau.com.au/forums/topic/245328-r32-gtst/
Share on other sites

been trying to upload these pics but it just wont happen for me if anyone need them i can email the pics.... this is a very good looking r32....

all reasonable offers shall be looked at thanks guys

Link to comment
https://www.sau.com.au/forums/topic/245328-r32-gtst/#findComment-4270410
Share on other sites

hey buddy sending the pics through to you now also i forgot that it has a bosch 040 fuel pump... and a pioneer mast unit but the dvd player and tv for the master unit is at pioneer being repaired... as we speak.... the master unit controlls all tv channels dvds and playstation!

can you email me pics thnx mate :down:

[email protected]

Link to comment
https://www.sau.com.au/forums/topic/245328-r32-gtst/#findComment-4274987
Share on other sites

hey Madskidz thankyou for adding those pics

no worries mate, if you got anymore you want to add...email em my way & i'll chuck em up for u!

as you can see from these pics, the car has been clearly looked after :P gl with the sale m8

Link to comment
https://www.sau.com.au/forums/topic/245328-r32-gtst/#findComment-4277176
Share on other sites

hey guys i really need to get rid of this car if the car sells in the next 3 days ill let it go for $7300 cash other wise i will start to advertise else i cant afford to keep this car much longer all that is needed for the epa now is an airbox put in or intercooler removed... i can probs get hold of a standard airbox if the car goes asap.... i will deliver interstate at buyers cost... also i forgot to add earlier i still got the standard series 2 spolier to go with the car aswell!!!!!

Link to comment
https://www.sau.com.au/forums/topic/245328-r32-gtst/#findComment-4305246
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Im not entirely sure exactly what or where its leaking from, he started to pull the boots to swap to my new tie rods + ends and it just vomited fluid, so he closed em up up, swapped the rod ends to the old rods and let me know so I can figure a solution out, im guessing its all origional as as I passed 103k miles earlier this year im sure its just in need of a full overhual/rebuild anyways.    If i could just yank it off and be good it wouldn't be an issue to ship it out and wait for the turnaround but the guy I work with doesnt really have space to keep my car for a week or two at a time, would rather drop it off and have a replacement ready to drop in
    • What do you mean by "seals"? Internal hydraulic seals (ie, is it leaking PS fluid?) or the rack boots that close the rack onto the tie-rods? Because the former is a rebuild, and the latter is trivial that you or any nearby mechanic could do. Dunno about the cowl. Just buy what you think is required and get anything else you find/break afterwards. Wing? Dunno. Don't like R33s enough to pay attention to them. Mirror glass is just glass (on the surface that you want to polish). Go for it.
    • Hello! Long time lurker, been using the forums to address concerns and questions from afar for a while but I've struggled to find some answers so I guess its about time I made an account and formally asked some more knowledgeable people, since finding local skyline owners is hard (and shops that are knowledgeable or trustworthy to work on 'rare' cars are non existent out where im at, as skylines are quite uncommon to find in the wild around here). So the main 3 questions I have, 1: Steering rack has blown seals, well.. they kind of hold but they are not sealed properly anymore and as my R33 is my DD, i cant exactly rip the rack out and send it off or attempt to fix myself. As most refurb ones are around $1,100 or more shipped, and I have other things I need to work on around the car, I was seeking clarification on whether an S15 rack will more or less bolt right in, and whether a common mechanic could do any other required work to get it to fit. I ask, as I've found a supplier than can sell a manufactured as oem one for around 400, if not I'll likely order a used one from Jacks JDM, and take a risk on the seals there. The second question i have is that im replacing the front wiper cowl and have planned to buy 4 new clips and a new center clip but wasnt sure if there were any other clips that would also need to get replaced while I was at it. Given im sure any that are there now will simply break when I remove the old cowl... Last thing would be a fairly straight forward question, i think. If I manage (strong if, finding one has proven to be a pain) to find a R33 GTR spoiler/wing will it require much modification to bolt to a S2 R33 GTST? I've read the bolt patterns dont match but otherwise would bolt in, only options I have found with much luck is China stuff on ebay and carbonetics, which has a nice $650 shipping fee... so if anyone has any pointers where a US chap could locate one that would be great Random side question as well, the mirrors as I understand are mirror glass, and as im planning to polish my windows from water spots and surface scratches, i was hopeful cerium oxide would be fine for them too, as my research points to, but clarification is always nice. Any pointers would be appreciated, and while I have scoured the internet for answers if I missed a prior post somewhere that may answer these directly please point me towards it, as i must have simply missed it. I have seen a post here or there that has mentioned it, but I usually get 50-50 answers, or half answers... I dont have a lot of fab experience or mechanic experience, outside of hydraulic and pneumatic stuff I did in the military and with how hard it is to source stuff in the US, id rather not wing it and hemmoraghe money lol. Thanks guys! Sorry for the monumental first post haha
    • Yep, there's a very minor drift left that happens a few seconds after letting go of the steering wheel, but not enough to bother me. Enjoying the car still!
    • Got you mate. Check your email!
×
×
  • Create New...