Jump to content
SAU Community

Recommended Posts

Hey guys,

Servicing my car soonish, i need to replace the timing belt mainly because i dont know when it was last done and better to be safe than sorry really.

Is there anything thats important to do on a 32 GTS-4 w/ RB20det while im changing the timing belt? I just remember something about changing the water pumps on the 34's at the same time due to the accessability of it or something.

Anything similar?

Obviously ill be doing plugs and such at the same time as the basic stuff just wondering if there was something else i should be aware of. Any input helpful guys.

Cheers,

Greg.

Link to comment
https://www.sau.com.au/forums/topic/245471-timing-belt-service/
Share on other sites

should say on your engine cover. Mine says 75000, and seeing as the previous owner didnt know if it was done by the owner before him im assuming that was the last time it was done.

because mines on 165000 now i figured i might as well just change it, better safe than sorry.

ive had mixed opinions about using a different timing belt. The fact is how different can it really be? Is my car reallllly operatin at over 5k rpm at all times that it needs one?

I just really think theres no point.

On a side note i was gonna do all the seals in the first place, comes in the timing belt kit. I dont really know why anyone buys a belt on its own.

Gday

just changed the timing belt myself on my R33 (Rb25DET)

Its not as complecated as you think

the RB25 and RB20 front ends are pretty similar so u shouldnt have a problem

the only problem ou might have is removing the harmonic balancer, which u need a puller for, but is fairly straightforward

make sure when the cover is off that you replace the TENSIONER and IDLER. Theres no point changing your belt just to have a bearing seize 2000 km later

The idler can be a little expensive (around 200 mark), with the tensioner around 120. no idea why its like that but hey it is lol

yeh and when you go to take a plug off you will probably damage a coil.. peice of shit things haha

but yeh as others of mentioned.. 100K the belt should be done by, do tensioner bearing and cam crank seals otherwise it makes it alot harder to do it twice, waterpumps shit themselves on 20s about 130 thousand kms and if your puln plugs out unless they are irridiums I would be replacing them and set ur plug gap at .8 but its one of those things.. where do you draw the line how far you go through? Coolant should be done every 30 thousand so its probably in need of that as well and all those heater hoses under the intake manifold will need attention especially seeing January/Feburary is comn up as thats usually when it starts getn hot

$500 bucks for a 20? i sold my last one for 200 with a good turbo and seen many others but they are pretty much needing the same attention anyway

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My apologies. I forgot we were talking about weird beard M series stuff. Had been talking elsewhere with someone about an R33 with similar subject and got confused.
    • Nope, I don't like the look of ND RF, or any ND really, I don't like their faces or arses, why, because of their "modern" lines, the NC, whilst "modernish" has a more rounded shape that I like Well, that's how my overly judgemental eyes see it anyway  
    • Should be more than fine, especially the overall fuel pressure would never exceed 3.5bar (assuming that thing never gets more than 0.5bar of boost in stock form). According to the chart, it's 11amps.
    • I definitely know the first rule here, look first, ask second. I've seen many people get roasted 😂 I found a few diagrams for the RB, but I'm yet to come across one for the VQ. From what I have read, the pump gets the +12v along with the FPCM, and it's the negative wire that gets passed through the resistor to regulate the voltage. So I assume I can just ground the negative wire at the pump to eliminate the FPCM control. But I really wanted to see the VQ circuit diagram first to make sure I understood it correctly. Once the new pump is in I'll do some testing to see how it behaves, and in the meantime, I'll keep looking for a wiring diagram. Thanks for your help mate, your time is greatly appreciated.    
    • Maybe? I have the Supercheap ToolPro low thingo. It has a somewhat smaller diameter lifting "bowl" than you would expect on a workshop grade trolley jack, and a split rubber pad to suit that diameter. It clears the "N1" style skirts I have. Probably wouldn't if the jack's bowl and a suitably larger rubber block were in use. Having said that though.....you only need the rubber block to exist on the inner side of the pinchweld, so could carve away any rubber that fouled the skirt, leaving some there for "insurance" </simples>
×
×
  • Create New...