Jump to content
SAU Community

Recommended Posts

Well I am now upto the parcel shelf part of my install and I've got a few idea's floating around but just wanted to see what everyone else has done, what works and what doesn't

Since gay compliance people put a massive hole in my standard speaker grille that is now out of the option, would have been nice and easy to tuck a 6.5" speaker under there, would have looked neat and standard as well

I've had the idea to recut a parcel shelf out of some thicker wood, MDF, something around 18mm would be ideal I would say, cut the holes for the speakers and recarpet it with the same colour carpet as the standard shelf. Mount the speakers straight onto the shelf it self and use the speaker grilles provided to make it look neat

Would this work?

Only issue I can think of is the mounting of the parcel shelf, no idea how that would work as the standard one is held in by clips..

Feel free to post any other ideas or pictures of installs you may have

Car is an R33 GTR and speakers are FOCAL 6.5" 165AI

Thanks

Link to comment
https://www.sau.com.au/forums/topic/245582-r33-parcel-shelf/
Share on other sites

haha I will get some tomorrow man

I made 19mm spacers out of MDF and they screw into the same as the factory plastic speaker pods did, cut the parcel shelf out so the speakers poke through a little as they are lager than facotry and will be using the standard speaker covers

Look stock, 6.5" speakers clear the factory shelf.. nice!

  • 1 month later...

Did you cut into the parcel shelf at all?

I got a massive defect from the previous owner cutting space in my parcel shelf to fit 6x9's.

Had to get it fixed and then an Engineer Cert, cost me a pretty penny considering I have 2 holes there now since i haven't replaced the speakers.

Hope you don't have to go through this.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...