Jump to content
SAU Community

Gt35r Vs Garrett T04z - Discussion (just Post In This Thread To Create A Database)


Recommended Posts

It shows another thing as well, not everything is shown night/day on a dyno sheet when talking circuit applications.

Plotted on graphs they might look very similar, however actually driving them on/off throttle is something else again

What would be very interesting is seeing the motors held at 5000rpm with no load then stomping on the loud pedal and comparing the curves that way.

I'm surprised no one does this as it would be a great way to demonstrate transient response. Obviously the same ramp rates and gearing would need to be used for it to be a useful comparison, but I don't think that would be too hard to do.

Edited by Rolls
  • 1 month later...

Gccg are fitting the TO4Z 63trim comp wheel into the GT3582r and are calling it a GT3566r , I guess this is mainly for the XR6 ford turbo engines as a up grade , But i was wondering if this turbo would be a good compromise between the Gt35r and the TO4z in giving the best of both worlds in both turbos , Garrett has just released the GTX3582r turbo so that also looks to be a option , closer to a TO4Z.

  • 7 months later...

I know its been a while since this thread was alive but i thought my results would spark up some debate again.

R34 GTT

RB26/30

Gt35r .82 rear

3.5" exhaust

exhaust side of head port matched and polished.

CP pistons

spool rods

9:1 comp

25psi

390.1rwkw

390rwkw.th.jpg

Nice result, which fuel?

believe it or not its on 98ron Shell Vpower =]

Never got a chance to test it on e85, especially after the twin 044 pumps and teflon fuel lines. Had a offer to buy it that i couldnt refuse. Deposit paid and the car picked up next week.

So sad =[

I never understood why people built cars like that and then sold them straight away, what is the point in spending all that money otherwise?

believe it or not its on 98ron Shell Vpower =]

Never got a chance to test it on e85, especially after the twin 044 pumps and teflon fuel lines. Had a offer to buy it that i couldnt refuse. Deposit paid and the car picked up next week.

So sad =[

These things make even more with aftermarket cams, a lad I know has made >400kw @ hubs on slightly less boost with an RB25/30 with a .82a/r GT3582R on 98 :)

  • 8 months later...

These things make even more with aftermarket cams, a lad I know has made >400kw @ hubs on slightly less boost with an RB25/30 with a .82a/r GT3582R on 98 :)

I never got to play with cams but judging by how efficient the setup was. Cams would of saw power everywhere throughout the rev range. Definitely worth while!

  • 3 years later...

I know its an old thread but I have a question with anyone that are or were running TO4Zs.

I am finding mine a bit oil blowy with a 1mm restrictor in a -4 oil feed line. Anyone have any issues running a 0.8mm or less restrictor. I am still on a run in tune with a 5k limiter and pushing 5+ bar engine oil pressure, so thinking might have to reduce the flow even more seeing that the zeds don't like anymore than 3 bar in their feed line. Any wisdom would be much appreciated.

Edited by XGTRX

I don't think you should run a restricter like normal gt turbo. I'm not running 1 on my t04z and I'm not having any problems

What size feed are you running, I am thinking maybe my -4 is to big

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Just trying to get my head around this. At 5psi of boost, you turn on your wmi pump, and then you're using a 3000cc injector, to allow flow upto the actual engine, where you have your 6x200cc injectors and a 500cc injector. If the above is correct, what advantage are you obtaining by having the 3000cc injector blocking flow, is this just incase a line breaks between that injector and the motor you can stop flow immediately? Or are the 6x200cc and 500cc less injectors and just spray nozzle?
    • Welcome! New member myself, but I had an R33 back in 2002. Best advice I could give, based on my experience: if you're running the factory turbo, be very conservative with boost. I made the mistake of just fiddling around with the boost controller and cranking the boost for fun, and the end result was my intake pipes popping off frequently from the constant deluge of oil that was being blown into the recirc by the stressed-out turbo, which itself was siphoning oil from the engine and farting it out both sides of its centre bearing (or something to that effect). If I could do it all again, I would have gotten a new turbo and had a tune dialled in professionally and then just left it alone! Funny you mention the metal shavings in the gearbox, as I had the same thing - the probe plug (magnetic drain plug, essentially) would come out caked with shavings. At least it was doing its job. Not sure if that's just sacrificial wear and part of the deal, or if my gearbox was shagged, but I wasn't abusing it. Enjoy the R33 - they're a dying breed, and if they weren't $35k+ on CarSales in Queensland, I might have picked up one of those again, instead of the 370GT I own now (though I'm loving the 370GT, that big 3.7L V6 just hits different).
    • Howdy folks. I owned an R33 back in 2002, which was thoroughly beyond my capacity (financially speaking) to maintain/insure, so we parted ways in 2004. Fast forward 21 years (to literally yesterday, in fact) and I'm now the proud owner of a 2007 V36 370GT. I'm happily surprised by how much power the VQ37VHR makes, compared to the RB25DET, considering the latter is turbocharged. I had planned to add a turbo at some point but I'm on the fence about whether I'll even need it (though I do love the sudden onset of extra torque). Any other 370GT owners around the traps, I'd love to hear about your experiences with this car (good and bad).
    • Perhaps the answer is... more jacks!* *proper jacks must be used.  
    • I NEVER think about using a scissor jack unless there is absolutely no other alternative. f**king things are dangerous, annoying and stupid.
×
×
  • Create New...