Jump to content
SAU Community

Recommended Posts

large622.jpg

large620.jpg

Hi all ...

We've just posted a really interesting story with photos on our blog about this.

You can read our story about it and view the rest of the photos of it at ...

http://www.tunersgroup.com/TunerWire_Live/

- Adam

That's very cool!

Hi Iron Chef - amazing huh :laugh:

And unlike most conspiracy theories, this one is actually there :wub:

You can view the satellite imagery of it here ...

http://maps.google.com/maps/ms?msa=0&m...mp;t=h&z=19

- Adam

Yeah I thought it was an interesting story when I read about it. One would think more info would have surfaced after a whole year though, surely?

Edited by floody
Yeah I thought it was an interesting story when I read about it. One would think more info would have surfaced after a whole year though, surely?

It has - a year ago it was mostly just rumour and innuendo, and we don't post anything until it is confirmed as fact.

Racecar Engineering only published their detailed article about the tunnel in the current issue of StockCar Engineering, and that article is only available in the print version of the magazine, and not on their website yet - as soon as the new article is available on their website, we'll provide a link to it.

The new article goes into huge detail about how the inside of the tunnel is set up, how tests are carried out in the tunnel, and the exact advantages of using a full sized tunnel over a wind tunnel.

The new article also says that a steam catapult like what they use to launch fighter jets off carriers has also been considered to increase the maximum speed possible inside the tunnel.

It also includes full details on the equipment used during testing, which includes datalogging by Pi Research, a pair of AQS Air Quest 1000 dehumidifiers, and a Vantage Pro weather controller - so essentially they can set the environment in the tunnel however they want it, for testing cars at different humidities, air temps etc.

The tunnel even has a turntable in it at the end of the tunnel so the cars can be turned around quickly for the next run, and Racecar Engineering's new article also reads ...

The test car can also tow a second car through the test section to simulate drafting, and multi-car tests have been conducted with two cars running nose to tail or side by side

As soon as the new article is available online, we provide an update and links to the new article - it has some very interesting diagrams and illustrations, and completely new info about the inside of the tunnel and how it is used.

- Adam

Oh, awesome, well be sure to let us know when your next massive industry insider scoop happens on this one.

Huh ?

It's an interesting story which clearly hardly anyone in Australia has heard about, and which up until Racecar Engineering confirmed the story in their very latest issue was mostly rumour. So now that a respected magazine like Racecar Engineering has confirmed it in the very latest issue of StockCar Engineering, and provided more technical info on it, we shared it with the forum - simple.

As I said above, a year ago it was mostly just rumour and innuendo, and we don't post anything until it is confirmed as fact. It's now confirmed as fact, so we posted it.

If unlike the vast majority of forum members you're not interested in our posts, feel free to ignore our future posts - I for one found it a very interesting story, and clearly many other forum members did too :P

- Adam

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
    • It's been quite the ordeal but hey, at least you figured it out.
    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
×
×
  • Create New...