Jump to content
SAU Community

Recommended Posts

definitely Starrys or drug squad.

couple of mates of mine are starrys, Zouma & Pacey (real names withheld) and you are correct in saying not to mess with them.

if they stop you car for any reason, they'll have you out of the driver's side window before you have time to touch the door handle......even if your window is wound up, lol

EDIT: Anyway, this is a Defect Thread, so everyone back OT (me included, lol) :P

Last wasteland entry:

I knew a starry years ago. He helped to handle some hostage situation out bush many yonks ago. He said his 'negotiation' was with his trigger finger. Funnily enough, that how the seige ended.

Not defected any more but a question that will benefit those that might be defected,

Ive had my resonator smashed up by a wheel alignment place and it started to leak. It was due to exhaust hanging too low. So i got it replaced by a hotdog on a recommendation from the shop. Currently the car is running a 3.5" catback Trust mild steel system (imported like this) with a 3.5" hot dog and a Trust cannon muffler.

Its not that loud as it is however I would like to lower the noise a bit more as

1. I don't want a loud exhaust as it gets annoying on long trips,

2. I don't want attention from every wanker trying to be a red light hero

3. I want to keep the authorities happy (although its pretty much on par with your average hsv rumble)

So what are my options in reducing the noise? I would like to keep the cannon and 3.5" exhaust due to a fairly free flow.

Ive heard that baffle plates reduce the noise a bit if done correctly which i would like to give a go. Anyone know of any good designs?

marko - baffle plates reduce the noise and will definately reduce the performance of the car

to keep you exhaust note on the low think of inserting another resinator and a mid muffler

i have a trust system with a mid muffler and its really and i mean really quite on the low revs and opens up on higher rpm's

so have a look into that as well mate instead of a baffle plate

What about a silencer Marko? PM Sled about it, I think he was running them in his GTR

Ohh yeah why didnt i think of that before

pete had a cannon silencer which you could take out if you wanted 2 minute job etc

ok so baffle plates are not the best solution then. Ive had a look and took a few measurements under the car and i don't have much room for another resonator. I could probably squeeze a smaller one in but i don't think that it will do any good.

The said silencer, is it one of those cone shaped things with a pipe behind it that you shove in the muffler itself?

example

http://cgi.ebay.com.au/APEXi-Super-Silence...%3A1|240%3A1318

Those cone things are defectable. Visible silencers are defectable. They can shoot out... even if they're bolted in, they're still defectable. Has been covered before.

Baffles, resonators or steel wool works a treat, and is legal (not so much the steel wool, but it's a temporary fix).

Edited by CRoNic...

Lol the electronic version or the manual?

You're talking about the ones you see advertised in the Hot4's magazines and stuff...

If you can hide it well enough, then you'll get away with it. But yeah that's defectable, too.

You either run your car permanently loud or permanently quiet. It's only when you get defected for loud is when you shove items into the exhaust to quiet it down. That's what I did with my old Familia.

^^^ what you said is so true there daniel

its either loud or quiet no in between

and for that exact reason people get baffle plates made up and shove things like daniel mentioned (steel wool lol)

I got my Stagea defected on Wednesday night last week (12/02/09) on Marion road just by the expressway overpass.

The officer said that my "exhaust was too low" and my wheels are too big. He didn't even check the tire placard, just assumed. Sure they might be 18x9.5+15 compared to the stock wheels that are 17x7.5+30, but the fact he didn't even look up what size they should be really got me. He ticked VIS so now I have to go to Regency. He said I will have to change the exhaust on the car, even though it is exactly the same as it was when it came through Regency originally!! He really wasn't interested in what I had to say, even when I told him I had a Senior Constable come to my house to check my exhaust due to complaining neighbors, and it was fine for noise and mounting.

I read in one of the first posts in this thread that you can call Regency and dispute the fact that you have to go for an inspection, and maybe you can just go to the cop shop and have the defect reinstated or cleared. I am going to do this because the defect is ridiculous.

Mmm that'd be tough to dispute that, Peter. In the eyes of Regency... it's a legitimate defect. If you got defected for... say... having a orange blinker, you could dispute that as that's clearly not a real defect.

It's the biggest load of bullshit that a cop can just look at an exhaust and say "Yep. Must be too loud" without any DB testing on it or anything. Same goes with the wheels... they really should check the tyre placard!! Even with tint, a cop can simply 'assume' that the tint is too dark without any testing.

The ID check you were talking about that you went through doesn't really matter. It's not a defect check, but rather, a ID inspection/compliance check which checks the bare basics (wheel size, etc). I went through with a big exhaust, turbo timer, etc through the ID check and they really didn't care. They can give you a defect, though... but you'd have to be pretty unlucky to cop one through there!

You can try to dispute it, but don't be shocked if they turn you down.

Goodluck.

aww wtf mate

thats seriously not right

i thought that if the tire placard says that the car has stock 16's then you could definately go 2 inches higher

so whats the deal with that

exhaust too low...thats debatable and shouldnt be a regency though

goodluck with it mate and hopefully its changed from a Visual to a cop shop defect

Edited by Krishy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You are selling this? I have never bought something from marketplace...i dont know if i trust that enough. And the price is little bit "too" good...
    • https://www.facebook.com/share/19kSVAc4tc/?mibextid=wwXIfr
    • It would be well worth deciding where you want to go and what you care about. Reliability of everything in a 34 drops MASSIVELY above the 300kw mark. Keeping everything going great at beyond that value will cost ten times the $. Clutches become shit, gearboxes (and engines/bottom ends) become consumable, traction becomes crap. The good news is looking legalish/actually being legal is slighly under the 300kw mark. I would make the assumption you want to ditch the stock plenum too and want to go a front facing unit of some description due to the cross flow. Do the bends on a return flow hurt? Not really. A couple of bends do make a difference but not nearly as much in a forced induction situation. Add 1psi of boost to overcome it. Nobody has ever gone and done a track session monitoring IAT then done a different session on a different intercooler and monitored IAT to see the difference here. All of the benefits here are likely in the "My engine is a forged consumable that I drive once a year because it needs a rebuild every year which takes 9 months of the year to complete" territory. It would be well worth deciding where you want to go and what you care about with this car.
    • By "reverse flow", do you mean "return flow"? Being the IC having a return pipe back behind the bumper reo, or similar? If so... I am currently making ~250 rwkW on a Neo at ~17-18 psi. With a return flow. There's nothing to indicate that it is costing me a lot of power at this level, and I would be surprised if I could not push it harder. True, I have not measured pressure drop across it or IAT changes, but the car does not seem upset about it in any way. I won't be bothering to look into it unless it starts giving trouble or doesn't respond to boost increases when I next put it on the dyno. FWIW, it was tuned with the boost controller off, so achieving ~15-16 psi on the wastegate spring alone, and it is noticeably quicker with the boost controller on and yielding a couple of extra pounds. Hence why I think it is doing OK. So, no, I would not arbitrarily say that return flows are restrictive. Yes, they are certainly restrictive if you're aiming for higher power levels. But I also think that the happy place for a street car is <300 rwkW anyway, so I'm not going to be aiming for power levels that would require me to change the inlet pipework. My car looks very stock, even though everything is different. The turbo and inlet pipes all look stock and run in the stock locations, The airbox looks stock (apart from the inlet being opened up). The turbo looks stock, because it's in the stock location, is the stock housings and can't really be seen anyway. It makes enough power to be good to drive, but won't raise eyebrows if I ever f**k up enough for the cops to lift the bonnet.
    • There is a guy who said he can weld me piping without having to cut chassis, maybe I do that ? Or do I just go reverse flow but isn’t reverse flow very limited once again? 
×
×
  • Create New...