Jump to content
SAU Community

Recommended Posts

you can still re-register a defected car if you really wanted.

it has to be done manually rather then electroniclly so you must go into a rego office and they fill out a paper type rego.

once cleared, you take the paper form of rego to a rego office and they transfer the remaining rego to their computer and give you a legit rego sticker.

Yeah but to get the permit to get rego he needs to drive to the police shop, which he cant do without rego, unless it still has rego now?

Edited by DSTROY

nah, he doesnt have to deal with the cops first. a permit to drive from the cops would be useless if its not rego'd as even with the back of the defect paperwork is filled out your not legally allowed to drive a unrego'd car (stating the obvious, i know)

all he needs in a regency date before he goes into rego a defected car. the car does not have to be with you just your rego and defect forms.

they will check your regency date, or at least wait on hold for as long as they can stand and have to take your word for it.

once it has the manual rego filled out, he can get a permit from the cops (the back of the defect paper work filled out) to drive the car around while defected.

you are allowed to drive a defect car without a permit if you are going to the cop station to get a clearence to drive.

BE WARNED, if a cop pulls you over and the mods listed on defected paper work are not actually cleared, he holds all right to pull your permit to drive till your regency date an youll be up shit creek as your car will need to be towed.

i have done this more then my fair share. i used to always for some reason get defected just before my rego ran out :P

EDIT: i just re-read what you wrote chad. the rego office doesnt have to have a clearence on the back of the defect notice before giving temp rego. if thats what you meant?

Edited by Import S13

I got defected last week for ride height, the thing is my ride height was fine. the cop wasn't using a tape measure he was estimating using his notebook! i had know way to prove him wrong. so now have to go through rengency, what a joke.

I got defected last week for ride height, the thing is my ride height was fine. the cop wasn't using a tape measure he was estimating using his notebook! i had know way to prove him wrong. so now have to go through rengency, what a joke.

i got done the similar way.....except mine was a "suspected suspension damage" so i dont know whats worse...

i would just get it measured by a suspension place and if its all good challenge them in court i guess

cops notebook is 100mm tall which he runs under the lowest part of the car.......I had a similar thing happen to me when a cop followed my bike to JK's shop (Cara was there too when he went over the thing)....no defect though, instead he followed me back home to grab a poster for his kid, lol

Castor rod and camber arms are as far as I know. Mech 2 way is also, but I have known people to get through with one even with it chirping away in front of the inspectors. Sway bars should be fine. What does the tension rod do? Is it like a rear strut brace or something?

Edited by Rolls
Castor rod and camber arms are as far as I know. Mech 2 way is also, but I have known people to get through with one even with it chirping away in front of the inspectors. Sway bars should be fine. What does the tension rod do? Is it like a rear strut brace or something?

it bolts on the front infront of the sway bar to make the front end more rigid afaik

anyone know if the following are illegal?

non adjustable sway bars - fine

tension rod - not legal

rear camber arms - not legal

castor rods - not legal

2 way mech diff - if they can prove it :)

there you go mitch

i doubt they are different

gtr's run 10psi stock if im correct and im running an rb20 actuator which does 12 so it shouldnt be a problem?

there is no way they will be able to tell the difference, I don't think it will be an issue.

anyone know if the following are illegal?

non adjustable sway bars

tension rod

rear camber arms

castor rods

2 way mech diff

sway bar shouldnt be an issue, camber arms they'll fail you for because theyre rose jointed or some shit, tension rod/castor rod... same same? either way, if its adjustable, get rid of it, and if they question your diff chirping along, say it was recently rebuilt.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Do they always do it from the AFM? If so... You know what I'm already thinking I reckon...
    • The other problem is that the pan is on an exchange basis, which would be a pain to have to send original sump to Oz for the work to be done. Would ideally need to be able to pay for a locally sourced core. To that end - I'd just fabricate one outright.
    • Not at all, pure street use, touge, even drag strip and you'll be fine   There's a larger version of it too, however would be overkill for your application. If you do plan on using that sump, might as well fit a headdrain/crank case vent to help alleviate crank case pressure. Your mechanic will also notice you cannot re-use the AWD windage trays on the motor too, as it fouls with the AWD -> RWD sump. However given your usage, you'll be fine.
    • @GTSBoy yeah but the MAIN problem is that "you" guys may know that but i/my mechanic did not. I literally spend hours to find differences between Stagea and Skyline engine (even here) and found kinda "nothing" Yeah one guy mentioned that the block is larger/wider but nothing about the oil pan. Of course AWD has different one but "everybody" says...yeah just slap RWD pan... and the parts number for my N/A engine and NEO DET were the same so iam using one from my old engine. And of course being in EU/Czech many of the sites did not even show(i need VPN to be here)... @MBS206NO it is not my channel and not my video. Dont even know the guy. I just post this as a reference cuz i have the same problem. As i said you guys in AU/NZD may know this but here it is kinda a new info cuz IF someone doing this swap they already have oil pan or they make custom one.  @Dose Pipe Sutututu Yeah it is AWD RB25DET NEO Yeah as you mentioned the pick up is in a different place ...but i do not drift or track the car. It is and will be strictly street and just "casual" weekend cruiser. With that "custom" pan as shown in the video...could there be some problems?  For others. Iam sorry if that topic "looks" like i want to show/boost some YT channel or numbers. Iam quite the opposite.  I would rather drive my car thru sewers than get the attention that this car gets here. I do not have any YT channel nor IG/Twitter or TikTok. I just want some info from time to time cuz here...there is none :-) 
    • +2 Mine came with a bonus flat battery. 
×
×
  • Create New...